What is 500cst oil?
General description. Silicone oil is a liquid based siloxane that is part of the methyl silicone fluid system. It has a viscosity of 500 cSt that is dependent on the chain length distribution. Its refractive index is ~ 1.402 and dielectric strength is ~ 14 kV/mm.
What shock oil weight should I use?
35 is considered a good general starting place. I run on a very packed track and I run 40wt in the front and 50wt in the back and it is VERY stiff. I suggest starting with 35wt and go from there. I would use 60-80wt for on-road.
What is cSt shock oil?
cSt is the expression for Kinematic viscosity, which is the ratio of a fluids viscous force to it’s interial force. Ideally, all of the oils that we use for our RC cars would be rated in centipoise.
What does WT mean in oil?
viscosity
Oil weight doesn’t refer to how heavy an oil is; it’s a measure of viscosity, or the thickness of a fluid.
What is silicone oil 350?
With silicone oil 350 cSt, you can easily change the hardness / Shore (stiffness), fluidity and elasticity of silicone. The oil can also be used to manually smooth out thickened silicone that has been brushed onto a surface. …
What does WT mean for oil?
What does heavier weight shock oil do?
Shocks control how fast and when the chassis will roll. Springs control how far the chassis will roll. Heavier shock oil (higher number) will slow that end of the car down, ligher shock oil (lower number) will let that end of the car react more quickly.
What weight is traxxas shock oil?
30 Weight
Traxxas Silicone Shock Damper Oil (30 Weight) It is approximately 30 weight oil (Traxxas does not list exact weight), comes in a 1/2 oz (approximately) bottle and is clear.
What kind of oil goes in traxxas shocks?
silicone shock oil
Traxxas introduces a complete line of premium silicone shock oil for all your RC needs. Available in seven weights, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive.
What is silicone oil used for?
Silicone oils are primarily used as lubricants, heat transfer oil or hydraulic fluids.
What are nitnitro shock absorbers?
Nitro shock absorbers are high quality, nitrogen filled shocks designed and gas charged specifically for each vehicle application. The addition of nitrogen under pressure limits the foaming effect and increases efficiency. Springs alone cannot provide a satisfactorily smooth ride.
Can you use motor oil as shock oil for RC cars?
Even though silicone shock oil is widely considered the best one to use, there is one more option available. Motor oil can be used as shock oil, but it’s much worse for the environment than its silicone-based counterpart. Motor oil needs to be measured out correctly to make sure the correct amount is being used for the desired RC car.
Is XTR similar in viscosity to silicone shock oils?
For XTR, we used some testing results from a large distributor of XTR that seemed to match our personal findings of XTR being very similar in real life viscosity to Associated silicone shock oils.
What is the difference between shock absorbers with piston and oil chamber?
It uses a piston and oil chamber similar to other shock absorbers. The difference is that instead of a double tube with a reserve chamber, a dividing piston separates the oil chamber from the gas chamber. The oil chamber contains a special hydraulic oil and the gas chamber contains nitrogen at 25 times atmospheric pressure.