What is 74HC04N?
The 74HC04N is a Hex Inverter. The inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of Vcc. 50mA supply current. CMOS Input level.
How many logic gates are on a 74HC04 logic chip?
As you can see each of the 6 Gates can operate individually based on the input signal.
What is the maximum input current of the 74HC08?
74HC08; o 6.0 V • Low Input Current: 1.0 mA � � High Noise Immunity Characteristic of CMOS Devices • In Compliance With th e JEDEC Standard No.
What is a hex inverter?
Hex Inverters – A hex inverter is a type of an integrated circuit that contains six inverters. Inverters are the foundation in digital electronics. Many sophisticated digital devices use inverters, including multiplexers, decoders, and state machines.
What is 74HC02?
The 74HC02; 74HCT02 is a quad 2-input NOR gate. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of V CC.
What is HC in IC?
HC stands for high speed CMOS, LS stands for low power schottky, a bipolar technology. In CMOS vs bipolar (TTL) there are threshold differences that were incompatible. Both were from a speed generation that could get you at least 20–30 MHz switching, maybe more.
What is the difference between a 74HC08 and a 74HCT08?
For 74HC08: the condition is VI = GND to VCC. For 74HCT08: the condition is VI = GND to VCC − 1.5 V.
Is 74HC08 a CMOS?
High−Performance Silicon−Gate CMOS The 74HC08 is identical in pinout to the LS08. The device inputs are compatible with Standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs.
WHAT IS AND gate IC?
The AND gate is a basic digital logic gate that implements logical conjunction (∧) from mathematical logic – it behaves according to the truth table above. A HIGH output (1) results only if all the inputs to the AND gate are HIGH (1). If none or not all inputs to the AND gate are HIGH, LOW output results.
What is 74HC32?
The 74HC32 is a 14 Pin Quad 2-Input OR Gate IC. The 74HC32 provides four independent 2-input OR gates with standard push-pull outputs. The device is designed for operation with a power supply range of 2.0V to 6.0V. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.