What is a Boomless nozzle?

What is a Boomless nozzle?

Boomless nozzles are used for vegetative management activities where it’s not practical, or sometimes even impossible, to use a horizontal boom. Unlike a typical flat fan nozzle, these nozzles direct spray laterally in one or two directions, creating a very wide spray pattern.

What is a water wand?

Definition of water wand : a device screwed onto the end of a garden hose to reduce the pressure of the water without decreasing the volume.

What is an ATV spray boom?

An ATV spray boom is a smaller, simpler version of large-scale agricultural equipment. Spraying in small orchards, vineyards or large lawns can be quickly completed using an all-terrain vehicle, or ATV with a DIY boom sprayer. A spray tank is mounted on the ATV rack; a boom holding several nozzles increases the amount of surface area sprayed.

How much does it cost to make a boom sprayer?

Once that is done the next step is getting a few supplies for this project, you’ll need a measuring device, a sprayer, water, a four-wheeler, chemicals, 4 rubber tie-down straps, and most importantly, personal protective equipment (PPE). The steps are easy to follow so you will be done in no time. 2. Homemade DIY Boom Sprayer $25

How to install a sprayer pump on an ATV?

Mount the boom on the ATV rack using the 1-by-1 3/4 U bolts. To protect the metal on the racks, you can insert a piece of rubber from an inner tube where the U clamps to the metal. Lastly, connect the polypropylene tubing to the compression T and to the sprayer pump outlet. Secure the connection to the pump with a hose clamp.

How to install boom metal on an ATV rack?

Place the square steel in a vice and drill the two holes about 12 inches apart, or where appropriate for mounting onto your ATV rack. Insert the bolts in the square steel and connect to the single hole on the long end of the bent flat steel pieces. Put on the washer, tighten the nuts and then prime and paint the boom metal for corrosion protection.