What is an IDE connection?
Integrated Drive Electronics (IDE) is a standard interface for connecting a motherboard to storage devices such as hard drives and CD-ROM/DVD drives. The original IDE had a 16-bit interface that connected two devices to a single-ribbon cable.
Is IDE the same as SATA?
IDE is an interface standard for connection of storages devices such as Hard Disk Drives (HDD), Solid State Drives (SSD) and CD/DVD drives to the computer. SATA is a computer bus interface or standard hardware interface which connects connecting hard drives, Solid State Drives (SSD) and CD/DVD drives to the computer.
What type of connector is used for standard IDE drives?
IDE consists of a 40-pin connector attached to a ribbon cable. 80-pin connectors were also introduced later. The connectors are black in a 40-pin connector while in an 80-pin connector, they come in 3 colors: blue – controller, gray – slave drive, and black – master drive.
What interface is IDE?
1. Short for Integrated Drive Electronics, IDE is more commonly known as ATA or PATA (parallel ATA). It is a standard interface for IBM computers that was first developed by Western Digital and Compaq in 1986 for compatible hard drives and CD or DVD drives.
How do I know if my HDD is SATA or IDE?
If you have removed the hard drive from your computer and the label is missing or does not display the type of drive, examine the connectors on the back of the drive. IDE connectors have metal pins visible, while SATA connectors extend out like the edges of computer add-on cards.
What is ATA IDE connector?
Parallel ATA (PATA), originally AT Attachment, also known as ATA or IDE is standard interface for IBM computers. The connection is used for storage devices such as hard disk drives, floppy disk drives, and optical disc drives in computers.
What are the different types of IDE connectors?
The most common types of IDE connectors are 40-pin and 34-pin. The former is mostly used for hard drives and built-in CD players, while the latter connects floppy drives to the motherboard.
What are IDE cables used for?
IDE Cables. IDE is a standard interface that connects the computer motherboard to a storage device. The most common of these types of cables are the 34-pin floppy drive cable that connects from the motherboard to the floppy drive and the 40-pin ribbon cable that connects from the motherboard to the hard drive and/or the cd drive.
How do I connect an IDE device to a single drive?
In single drive configurations, connect the primary drive to the end connector on the 40-pin 80-conductor cable. Here are some quotes from leading websites about connecting IDE devices: The 40-pin 80-conductor cable is orientation specific.
What is the speed of IDE cable?
The IDE cable is a type of AT Attachment which has had speeds from 33, 66, 100 and 133 MB/s. A faster cable can go in a slower hard drive but a slower cable will decrease the speed of a fast hard drive. One IDE ribbon cable can connect a hard drive and a cd drive to the motherboard, it can also connect two hard drives to the motherboard.