What is default router in DHCP?

What is default router in DHCP?

Specifies the IP addresses of the default routers for a client.

What are the steps to configure DHCP?

How to Install DHCP Server

1. Step 1: Open Server Manager. Click the start button then click the Server Manager.
2. Step 2: Add roles and features.
3. Step 3: Select Role-based or feature-based installation.
4. Step 4: Select destination server.
5. Step 5: Select server roles.
6. Step 6: Feature, DHCP Server.
7. Step 7: Confirmation.

How do I check my DHCP settings?

To display DHCP configuration information:

1. Open a command prompt.
2. Use ipconfig /all to display all IP configuration information.
3. Observe whether you have any network adapters that are DHCP Enabled. If so, identify your DHCP Server, when it shows Lease Obtained, and when it shows Lease Expires.

What is DHCP server configuration?

Dynamic Host Configuration Protocol (DHCP) is a client/server protocol that automatically provides an Internet Protocol (IP) host with its IP address and other related configuration information such as the subnet mask and default gateway.

What precisely is Packet Tracer used for?

Packet Tracer is a networking simulation tool (as stated above) used for practice, discovery, and troubleshooting designed by Cisco. Cisco’s official website describes Packet Tracer as: “A powerful network simulation program that allows students to experiment with network behavior and ask ‘what if’ questions.”

What does a ‘Packet Tracer’ do?

Packet Tracer is a cross-platform visual simulation tool designed by Cisco Systems that allows users to create network topologies and imitate modern computer networks. The software allows users to simulate the configuration of Cisco routers and switches using a simulated command line interface.

What does Packet Tracer stand for?

Packet Tracer (Activity File For Practice) by Cisco Systems, Inc.Packet Tracer is an interactive network simulation and learning tool for Cisco CCNA instructors and students. It allows users to create network topologies, configure devices, inject packets, and simulate a network with multiple visual representations.

Where is DHCP settings?

DHCP (Dynamic Host Configuration Protocol) Server Settings are commonly found on broadband router firmware. The DHCP section is where you can configure the router’s built-in DHCP Server to assign IP addresses to the computers and other devices on your local area network (LAN).