What is Juniper VC?
Virtual Chassis Basics on Switches. Virtual Chassis is a feature on Juniper Networks routing or switching devices that provides network resiliency in the form of redundant Routing Engines and network expansion flexibility with minimal impact to a configuration.
What is VCP in Juniper switch?
A Virtual Chassis port (VCP) in an EX8200 Virtual Chassis is any port whose function is to send and receive Virtual Chassis Control Protocol (VCCP) traffic to create, monitor, and maintain the Virtual Chassis.
What is virtual chassis technology?
Virtual chassis is very similar to a distributing computing concept called a single system image (SSI), which is a cluster of devices that appears to be a single device. The two routers R1 and R2 are joined together by a virtual chassis port (VCP) to form a virtual chassis.
Can you stack Juniper switches?
You can interconnect up to ten EX4600 switches or a combination of up to ten EX4600 and EX4300 switches into an EX4600 Virtual Chassis.
What is Juniper VCF?
The Juniper Networks Virtual Chassis Fabric (VCF) provides a low-latency, high-performance fabric architecture that can be managed as a single device. VCF is an evolution of the Virtual Chassis feature, which enables you to interconnect multiple devices into a single logical device, inside of a fabric architecture.
How does MC lag work?
An MC-LAG provides redundancy and load balancing between the two MC-LAG peers, multihoming support, and a loop-free Layer 2 network without running STP. On one end of an MC-LAG, there is an MC-LAG client device, such as a server, that has one or more physical links in a link aggregation group (LAG).
What are two benefits of the Virtual Chassis fabric VCF technology?
VCF has the following attributes: It has a deterministic latency between any two end points within the fabric. It has a deterministic performance between any two points within the fabric. It supports workload mobility – any workload, anywhere in the fabric – without impacting performance.
What is IP fabric Juniper?
©2019, Juniper Networks, Inc. IP Fabric EVPN-VXLAN Reference Architecture. Multihoming. Multihoming Support for Ethernet-Connected Systems. The Ethernet-connected multihoming technology enables Ethernet traffic to be load-balanced across the fabric between VTEPs on different leaf devices connected to the same end …
What does SRX stand for Juniper?
Security, Routing and Switching
SRX stands for Security, Routing and Switching ..
What is juniper Virtual Chassis?
Virtual Chassis is a feature on Juniper Networks routing or switching devices that provides network resiliency in the form of redundant Routing Engines and network expansion flexibility with minimal impact to a configuration.
How do I power on my Juniper ex Switch?
Power on each EX Switch, but do not connect any Ethernet or VC cables yet. Physically connect the switch with Juniper Mist access to the internet using either a management or revenue port. The switch will automatically receive Zero Touch updates from the cloud, including the DNS settings it will need.
Can I set other ports as VCPs in Junos OS?
The Junos OS doesn’t prevent you from trying to set other ports as VCPs, but they don’t operate properly as VCPs. Any ports other than those specified above for QFX5120-48Y and QFX5120-48T switches are not supported as VCPs. The Junos OS CLI doesn’t return an error if you try to set other ports as VCPs, but they will not work properly as VCPs.
What is the purpose of a VCP?
VCPs are responsible for passing all data and control traffic between member switches in the Virtual Chassis. Some switches have dedicated VCPs; you can only use these ports as VCPs and you can’t reconfigure them as network ports.