What is L6 30R used for?
The NEMA L6-30 is used for input on the domestic APC Matrix-UPS, Smart-UPS T models, and Symmetra RM 2-6kva UPS.
What is L6 30P?
Description: 30 AMPERE-250 VOLT (NEMA L6-30P) LOCKING PLUG, SPECIFICATION GRADE, IMPACT RESISTANT NYLON BODY, CABLE DUST / MOISTURE SHIELD (IP20), 2 POLE-3 WIRE GROUNDING (2P+E). * Power cords, plugs, connectors, outlets, inlets, receptacles, adapters are listed below in related products.
How do you wire a L6 30R?
Hold the NEMA L6-30R receptacle and view the terminal screws behind it. Wrap the red wire clockwise around the brass terminal screw; tighten the connection with a screwdriver. Wrap the black wire clockwise around the brass terminal screw; tighten the connection.
Can I plug L6-30P into L6-30R?
This NEMA L6-30P to L6-30R cord can be used to connect a PDU or UPS system to an AC wall outlet or connect another high-output device to a PDU or UPS with L6-30R outlets. It is also a recommended replacement or upgrade of a standard power cord provided by the device’s manufacturer.
How do you wire a L6-30R?
Does L6 30 have a neutral?
NEMA L6 connectors are rated for a maximum of 250 volts. They are intended for two-pole, three wire, line-line-earth (or hot-hot-ground) circuits with a nominal supply voltage of 208 or 240 volts, depending on phase configuration. The L6 connector does not provide a neutral connection.
What does L21 30 mean?
NEMA Locking L21-30 male Plug Three Phase WYE power cords. Capable of 30 Amps with 8 AWG cord and appropriate female connector. Locking plugs have the pins arrayed in a circular manner and operate at 120/208 Volts. The plug offers three Hot Lines, Neutral, Ground.
What are L6 30 connectors used for?
NEMA L6-30 Male Premium Turn-Lock Plugs, Sockets, and Receptacles Also known as twist-lock devices, these connectors are built to handle tough, repetitive-use applications, and are more durable than standard turn-lock connectors.
What is the NEMA L6-30 receptacle used for?
The NEMA L6-30 is used for input on the domestic APC Matrix-UPS, Smart-UPS T models, and Symmetra RM 2-6kva UPS. The NEMA L6-30 receptacle is also used as an output receptacle for supplying 208 VAC in the Matrix-UPS, the Smart-UPS T models, and single phase Symmetra systems (Power Array, RM, LX).
What kind of socket do you use for a turn lock?
NEMA L6-30 Socket These cords have an oil- and water-resistant insulation and impact-resistant connectors for protection in harsh environments. Give the connectors a quarter turn to lock in place; they remaining secure in high-vibration applications. GFCI Turn-Lock Extension Cords
What are NEMA 6P connectors used for?
For technical drawings and 3-D models, click on a part number. When mated, connectors meet NEMA 6P for protection against corrosion and washdowns. All have a multiple-ring seal and rubber housing to keep out liquid. They resist heat, oil, and chemicals.