What is SAE flare fitting?
Flare fittings are a type of compression fitting used with metal tubing, usually soft steel, ductile (soft) copper and aluminum, though other materials are also used. SAE fittings are typically made from brass. SAE and AN/JIC connections are incompatible due to the different flare angle.
Is SAE and flare the same?
SAE and AN/JIC fittings are completely incompatible due to the different flare angle. Furthermore, AN fittings (or those complying with subsequent standards) and JIC fittings are not interchangeable for design-controlled applications due to differing quality standards.
Do you use Teflon tape on flare fittings?
Do not use Teflon ® tape or pipe sealant on any flare ends because you will not obtain a leak-free seal. Keep flare end of fitting free of grease, oil and thread sealant. Use a wrench only on the hex surfaces of the fittings.
What are flare fittings used for?
Flared fittings are also a good option for use with heavy machinery, and industrial and construction equipment. They are the fitting is most commonly used to connect tube or hose in high-pressure and high-temperature applications. The flare fitting is commonly used world-wide because it is a simple construction.
Is JIC the same as flare fittings?
AN and JIC Fittings Interchangeability AN 37° flare and industrial 37° flare fittings function identically. In many cases, they appear to be functionally interchangeable, but they are not.
Can I use a double flare instead of a bubble flare?
Can you use a bubble flare instead of a double flare? The simple answer is no. The line and port are completely different and will not come close to sealing. When doing brake lines, you need to determine what type of flare you need for your car.
Should flare fittings be taped?
The threads in a flare fitting are NOT tapered and do not need to be sealed. The seal is between the flared end of the pipe/tube and the tapered face of the other side of the fitting. All the threaded collar does is supply force to create a seal between the opposite tapers of the two ends.
Can you over tighten a flare fitting?
Fourth, don’t over-tighten the flare fitting, as this can cause leaks. Daikin offers preset flare torque wrenches that will allow you to properly tighten the flare fitting without over-tightening them. Always use a backup wrench when tightening any flare fitting.
Do you use pipe sealant on flare fittings?
Do not use Teflon ® tape or pipe sealant on any flare ends because you will not obtain a leak-free seal. Keep flare end of fitting free of grease, oil and thread sealant. If fitting is installed improperly, remove fitting, reapply sealant and reinstall properly per instructions.
Are SAE and JIC fittings interchangeable?
The majority of the hydraulic population agrees, the JIC (or SAE) 37 degree fittings are generally interchangeable with AN fittings. And it’s worth noting that the JIC fittings are a fraction of the price of their true “AN” counterparts.
Is inverted flare the same as double flare?
The first is the inverted double flare, used by most domestic production cars and trucks. … It uses a 45* double flare to seal, which has tubing that is folded over into itself before flaring outward. The double flare is used for installations that require repeated tightening/untightening.