What is the difference between composite and non composite floor deck?

What is the difference between composite and non composite floor deck?

DACS Non-Composite decks are used when only a form for a concrete slab is desired. Unlike composite deck, selection of non-composite deck is not determined by the uniform load being supported, since in a non-composite application the deck is only used as a form for the concrete and not for positive reinforcement.

What is the most common type of composite metal decking?

Composite floor deck
Composite floor deck is a corrugated metal deck that has embossments in the flutes of the metal decking. As the concrete slab cures, the metal deck and the concrete bond together to create a composite metal floor deck. This is the most common type of metal floor decking.

How is the metal deck attached to the open joists?

Welds. Metal deck is often installed using arc spot welds, either with or without weld washers. Arc spot welds, also referred to as “puddle welds”. When welding, it is essential that the weld penetrates into the supporting joist or beam, and that the puddle is above the deck surface.

What is ververco W2 formlok™ floor deck?

Verco® W2 FORMLOK™ floor deck provides savings by the elimination of temporary forms and shoring, and allow for immediate use of the metal deck as a working platform for all trades.

What types of decking does Verco make?

For more than 50 years, Verco has been manufacturing many different types of deck, including roof deck, floor deck, composite floor deck, cellular and dovetail deck. Following are the details you’ll need about any of our products. You’ll get the answers that will help make your next project a success.

What kind of screws does Verco use for sidelap?

In this catalog, Verco features a complete range of systems utilizing the PunchLok II System for sidelap connections: 1½” deep PLB-36, 3″ deep PLN3 and 3″ deep PLN-24 with welds and mechanical fasteners (power actuated fasteners and screws) to the supports, and PLB-36 deck with ShearTranz II-42.

What is a W2 profile on a deck?

Type W2 FORMLOK™ profiles are 2-inch deep composite deck designed for shorter span floor deck conditions. The standard profile contains 3 ribs and is 36 inches wide with opposing male and female edges, creating an interlocking side lap when installed.