What is the priority button on Rinnai?
When you press the “Priority button,” the green light will glow, indicating that the controller controls the temperature and that a water heater is ready. Rinnai water heaters work in the temperature range from 98 F to 140 F, while they come with the factory setting of approximately 120-125 F.
How do Rinnai controllers work?
How does a temperature controller work? A temperature controller will take an input signal from a temperature sensor and will in turn create an output signal that is connected to the heating element. The controller will compare actual temperature of a fluid or space to the desired control temperature, or setpoint.
How do I reset my Rinnai controller?
control•r™ 2.0 – How do I factory reset the module? Press and hold the Connect button on the module until the LED blinks RED and WHITE, and then release then QUICKLY tap 3 times. This will restore the module back to original factory settings.
What temperature should Rinnai be set at?
120℉
For your safety, Rinnai tankless water heaters come with a maximum temperature default setting of 120℉ to help prevent scalding. However, by following these simple steps, you can increase the temperature to 140℉ if you choose.
What is the normal temperature setting for a tankless hot water heater?
You’ll want to shoot for 100-115 degrees Fahrenheit for your water to be heated. If your groundwater temperature is 60 degrees and you want your shower at 110 degrees, that’s going to be a 50-degree rise.
How do you use a Rinnai heater?
To turn the heater on and set the temperature: Ensure heater is plugged in and the power socket outlet is switched on. 1. Turn the main power switch located on the right hand side of the appliance, to the ‘on’ position. The digital LCD Display will illuminate briefly and a double beep will be heard.
How do you light a Rinnai heater?
Turn control Knob to “IGNITION PRESS”. Press the knob firmly, and hold down for about 15 seconds, the electronic ignition system will ignite the pilot, and the spark will continue while the knob is held down. Release the knob.
What temperature should I set my tankless hot water heater to?
How do I connect my Rinnai to WIFI?
Download the Rinnai app from the Apple® Store or Google® Play Store. 3. Connect the module to your Wi-Fi network. When setup is complete, the owner will have access to remotely monitor and control their Rinnai tankless water heater using their smart device.
What temperature should I set my Rinnai tankless water heater?
For your safety, Rinnai tankless water heaters come with a maximum temperature default setting of 120℉ to help prevent scalding. However, by following these simple steps, you can increase the temperature to 140℉ if you choose.
Can I use the mc-601q with my Rinnai continuous flow water heater?
If the MC-601Q is not listed as being compatible in the Operation & Installation Manual supplied with your Rinnai Continuous Flow Water Heater, then contact Rinnai for advice. Refer to page 3 of this manual to confirm the maximum number and combination of controllers that can be fitted to a compatible Rinnai Continuous Flow Water Heater model.
How do you set the temperature on a Rinnai condensing water heater?
How to Set the Temperature Manual – Rinnai Condensing Water Heaters 7 1. If the water heater is off, press the ON/OFF button to turn on. While any hot water is being provided, the temperature setting can only be adjusted between 98º F (37º C) and 110º F (43º C).
Does my Rinnai Water Heater have a pilot light?
Rinnai Continuous Flow water heater products do not use a pilot light. When installed and operated without water controllers, the opening of any hot water tap will automatically start the appliance. Once water is flowing through the appliance the burner will be ignited by electronic ignition.
How do you turn on a universal water controller mc601q?
Universal Water Controller (MC-601Q) Layout Turning On If the water controller is switched off (No digits displayed in the digital monitor window) press the On/Off button once. The ON indicator will illuminate, indicating that the hot water unit will be ready to supply hot water once a hot water tap is opened. Adjusting Temperature