What length does worktop come in?
2. Sizes. All wood worktops are available in a vast variety of sizes, starting from 2000 x 620mm with a 27mm thickness and ranging to as large as 4000 x 720mm with a 40mm thickness. The lengths of our laminate worktops are available between 3000mm and 4100mm, with a width of 600mm and a thickness of 38mm.
Are Duropal worktops any good?
The Duropal brand sells itself. They have a long history as a trusted and quality manufacturer of laminate worktops, specialising in their field. They’re the true experts. When you buy from Duropal you can be sure that you’ll be getting a well-crafted worktop that is synonymous with quality and attention to detail.
What widths do kitchen worktops come in?
Standard size worktops tend to come in either 600 or 650mm widths.
Can worktops be cut to size?
We can professionally cut laminate worktops to size, in both width and length.
What length are Wren worktops?
Both designs and materials complement a range of kitchen units – from Contour to Handleless. The Stealth island and mantle is available in either a right or left-hand version. The island comes in two sizes – small 2434 x 1200mm and large 2934 x 1200mm.
Are duropal worktops hard to cut?
Cutting. Duropal compact laminate worktops are very hardwearing and it is essential for a good job that good quality machinery, clean and sharp cutters are used to produce a professional finish that ultimately saves time and effort.
How wide is a breakfast bar worktop?
These worktops start at a width of 900mm up to a width of 1240mm – and larger sizes are available via our made to measure worktop service.
What is the best saw for cutting kitchen worktops?
circular saw
A circular saw is often the best option to cut laminate worktops. Make sure the blade is sharp (replace the blade if you have been using it for a while) and suitable for fine cuts—it should cut through the worktop without any issue.
What is the best blade for cutting worktops?
For solid and veneered worktops, you need a cross-cut, fine tooth saw blade with 48 teeth. For laminated worktops, it is advisable to use the triple chip grind saw blade, also with 48 teeth.
Do Wren worktops come cut to size?
Your worktop will arrive ready cut with top surfaces polished and ready to install – apart from downturns which are trimmed to fit onsite. Please make sure that your order – including colours, special options and finishes – is correct and matches the order documentation before installation.
What are the different sizes of Duropal worktops?
Duropal Kitchen Worktops available in 4.1mtr and 2mtr lengths, in 600mm, 670mm and 900mm widths. Massive selection of decors including gloss ant matt finishes and the rugged crystal stone finish.
What sizes do Duropal breakfast bars come in?
Duropal Breakfast bars are available in a choice of both 670mm and 900mm widths Supplied in full size lengths of 4.1m, half boards also available* *Please note: Duropal Half Boards i.e. 2050mm are not a manufactured size.These are rough cuts. Tolerances must be allowed for. If you are unsure please call our helpline for further assistance.
Why choose Duropal?
Since 1958 Duropal has been a world leader in the manufacture of decorative high pressure laminates (HPL). Throughout the 1960’s Duropal was at the forefront of technological development in the industry including the first industrial scale application of urea resins for gluing HPL to chipboard; the recognised standard in use today.
What is the scratch and wear resistance of Duropal-HPL?
This is the reason for the high scratch and wear resistance of Duropal-HPL. The high impact resistance of the material is due to the elasticity of phenolic resin. These properties also explain the high resistance of HPL to chemicals and heat.