What material is ArmaFlex?
AP ArmaFlex®, the original elastomeric closed-cell foam insulation, has been the chosen fiber-free mechanical insulation since its introduction in 1954. Superior condensation control and consistent thermal performance have made ArmaFlex the preferred insulating material for pipes and ductwork.
What is armacell 520 adhesive used for?
ArmaFlex® 520 Adhesive is an air-drying contact adhesive that is excellent for joining seams and butt joints of ArmaFlex pipe and sheet insulations for line temperatures up to 250°F (120°C).
How do you fit ArmaFlex?
When gluing joints under compression, with no gaps present, the wet adhesive method should be used. Pull the seam apart slightly and apply Armaflex adhesive thinly and evenly with the brush to both surfaces and press together. No open time is needed in this case.
Is ArmaFlex waterproof?
Armaflex Tuffcoat Class O 1m Underground Waterproof Pipe Insulation-42mm-19mm-Wall – 42mm Pipe Insulation – Insulation by Pipe Size – Pipe Insulation.
Can you paint armaflex?
ArmaFlex WB Finish may be tinted for indoor applications with selected pigment pastes recommended for shading or coloring latex paints at less than 4 ounces per gallon. When WB Finish is used for outdoor application, tinting is not recommended.
How long does armaflex last?
Two coats of Armaflex WB Finish must be applied for optimal performance. Its special elastic properties make it exceptionally durable and weather resistant to ultraviolet (UV) and ozone. Outdoor surfaces should be recoated every 2 to 4 years. Fewer inside insulation applications require some type of protection.
How long is a stick of armaflex?
Width 48” wide (1.22m) Thickness (nominal) x Length. 3/8” x 100′ (10mm x 30.5m) 1/2” x 70′ (13mm x 21.4m)
What adhesive do you use for Armaflex?
The golden color adhesive may also be used to apply ArmaFlex Sheet Insulation to flat or curved metal surfaces that will operate at temperatures up to 180°F (82°C). ArmaFlex 520 Adhesive is the preferred contact adhesive for all ArmaFlex foam applications.
What temperature can Armaflex be used at?
The one-component adhesives can be used at operating temperatures between -30 and +100 ºC. The Armaflex SF990 adhesive is suitable for gluing all Armacell insulation materials based on synthetic rubber (with the exception of HT/Armaflex and Armaflex Ultima).
What is the Armaflex Ultima sf990 adhesive?
The Armaflex Ultima SF990 adhesive was specially developed for installing Armaflex Ultima and insulation materials based on Armaprene®synthetic rubber. Apart from the general Armaflex installation guidelines, there are addi- tional instructions for the use of dispersion adhesives.
Why is there a film of moisture on my Armaflex®adhesive?
High atmospheric humidity and high temperatures lead to faster evaporation of the solvent in Armaflex®adhesive. This means that a film of moisture may appear on the surface of the adhesive.