What oil goes in a Eaton Fuller transmission?

Use Roadranger CD50 or equivalent E500 synthetic per Eaton publication TCMT-0021. When adding lubricant, types and brands of lubricant should not be mixed because of possible incompatibility. Use clean lubricant and clean containers when filling the transmission.

What kind of oil goes in a Eaton 18 speed transmission?

Eaton’s PS-386 Synthetic transmission lubricant is designed for fuel efficiency, extended drain intervals, and severe service in heavy-duty commercial vehicle transmissions which require a non-EP transmission lubricant.

How much oil does an 18 speed hold?

Approx. 28 pints [13.3 liters]. Integral oil pump standard. Oil to water heat exchanger standard on 18918B, 20918B and 22918B (Requires 2 pints [.

How much oil does a 8ll transmission hold?

Oil Capacity: • Approx. 28 pints [13.2 liters]. Optional integral oil pump available.

How much oil does an Eaton 13 speed hold?

Approx. 28 pints [13.25 liters].

What does RTLO stand for?

RTLO

Acronym	Definition
RTLO	Roadranger Twin Countershaft Low-Inertia Overdrive
RTLO	Regional Training Liaison Officer

How much oil does a semi rear end hold?

Each component will hold about 4-5 gallons.

How much does a 18 speed transmission weight?

Eaton 18 speed Transmission

SPECIFICATIONS	CAPACITY	WEIGHT*
RTLO-16918B	1650 lbs.ft. [2237 Nm]	716 lbs. [324.77 kg]
RTLO-18918B	1850 lbs.ft. [2508 Nm]	716 lbs. [324.77 kg]
RTLO-20918B	2050 lbs.ft. [2779 Nm]	716 lbs. [324.77 kg]
RTLO-22918B	2250 lbs.ft. [3050 Nm]	716 lbs. [324.77 kg]

How much does a Eaton transmission weigh?

Unbeatable versatility with 19.7 to 1 overall reduction and 14.40 low gear. Economical performance with 0.73 and 0.86 overdrives for efficient cruise RPMs….All Solutions by Market.

Product Snapshot
Torque Capacity Lbs.Ft. (Nm):	1450-2250 (1966-3050)
Weight Lbs. (kg):	716 (325)
Length Inches (mm):	33.1 (841)

How many gears does a 8LL transmission have?

eight
The Fuller 8LL transmissions provide drivers with the versatility they need for a mix of on- and off-highway applications. These transmissions offer eight road speed gears and two additional deep reduction ratios in low and reverse.

How much does a 8LL transmission weigh?

Increased lubrication protection with optional integral oil pump. Standard SAE 6-bolt and 8-bolt PTO openings and optional thru-shaft PTO provision at rear….8LL.

Product Snapshot
Speeds:	10 forward, 3 reverse
Torque Capacity Lbs.Ft. (Nm):	860-1650 (1166-2237)
Weight Lbs. (kg):	690 (313)
Length Inches (mm):	33.1 (841)

How much oil does a Eaton 10 speed hold?

Approx. 23.5 pints [11.1 liters]. Integral oil pump, internal and external oil coolers are available.

Where to buy parts for rtlo-16913a?

What are the transmission fluid requirements for Eaton top 2 transmission systems?

Line Inspection – All Eaton Top 2 transmission systems installed at OEM plants must pass the requirements outlined in Transmission Fluid 50 ALL Transmission Capacity 9-Speed 28 pints (13.2 liters) 10-Speed 26 pints (12.3 liters) 13/18-Speed 28 pints (13.2 liters) Improper Oil Level Hole Proper Oil Level

How many liters of oil does a 9 speed transmission hold?

Transmission Capacity 9-Speed 28 pints (13.2 liters) 10-Speed 26 pints (12.3 liters) 13/18-Speed 28 pints (13.2 liters) Improper Oil Level Hole Proper Oil Level Hole 9 Installation Requirements Proper Lubrication Levels as Related to Transmission Installation Angles

Can I put a 1850tq clutch in a 16913a?

You can put a 1850tq clutch in or 2050tq. You can even order a clutch from lipe with more tq rating or get a custom one built to handle a hella more. Forgot the spline count on the shaft of a 16913A if its 11 or 14 spline. That takes care of the clutch part. The bearing size and metal hardness is next problem.