What size bearing is l44649?
L44649/L44610 Timken Tapered Roller Bearing 1.0625×1. 9800×0. 5600 inch
| Dimensions – d (inside diameter) | 26.99mm |
|---|---|
| Dimensions – D (outside diameter) | 50.29mm |
| Dimensions – B (width) | 14.22mm |
What bearing goes with L44610?
L44610 Replacement Trailer Hub Race Race provides smooth surface for bearing to roll on inside of trailer hub. Works with 25580 bearing. Replacement part uses industry-standard number.
What size is a L44643 bearing?
This L44643/L44610 taper roller bearing is made of chrome steel, is unsealed, and has a steel cage. It has a 25.4 mm inside diameter, a 50.292 mm outside diameter, and a 14.7 mm depth.
What seal goes with L44649?
The seal part most often used with inner/outer bearing L44649 is seal part # 10-9 which has an inner diameter of 1.50-inches and an outer diameter of 1.987-inches so bearing kit # BK1-150 that you referenced should do it.
Are inner and outer trailer bearings the same?
They are always replaced in a set – that is the cup and cone together. In the wheel hub, the bearing on the inside of the hub flange (the side closest to the centre of the trailer) is called the inner bearing. The bearing on the outside is called the outer bearing.
What race goes with bearing L44649?
Works with L44610 race. High-quality, tapered roller bearing is designed for high-speed use.
What is #84 spindle?
A #84 spindle, like # TRU24FR or # TRU47FR is bigger and is used for 3,500 lb axles. Common sizes for these are 2-3/8 inch round axle, 3 inch round axle, and 2 inch square axle.
What seal goes with bearing L68149?
Expert Reply: When the L68149 bearing is paired with the L68111 race, the 10-19 grease seal is used. However when the same bearing is used with the L68110 race on a boat trailer, the # 168233 seal is usually used.
What is a BTR spindle?
The BTR and BT8 denotations refer to the spindle, not the trailer hub. The difference between a BTR and BT8 spindle is that the BTR spindle uses a 1.063″ diameter L44649 bearing and the BT8 spindle uses a 0.99″ diameter L44643 bearing. If you have BTR spindles then you can use part # AKIHUB-440-2-2K.
What size is #84 spindle?
1 3/8″
This Spindle is referred to as a #84 Spindle, using a 1 3/8″ ID Inner Wheel Bearing and a 1 1/16″ ID Outer Wheel Bearing. Additionally, this Spindle uses the standard 1.72″ ID Seal Surface.