What size is 5/8 inch in MM?
Conversion table inches to mm
| Dimensions — Inches to Metric | ||
|---|---|---|
| 0.625” | 5/8” | 15.88 mm |
| 0.688” | 11/16” | 17.48 mm |
| 0.750” | 3/4” | 19.05 mm |
| 0.813” | 13/16” | 20.65 mm |
What size socket is between 12mm and 13mm?
Metric Socket Sizes Chart
| 3/8″ Drive | 1/4″ Drive | 1/2″ Drive |
|---|---|---|
| 8mm | 5.5mm | 11mm |
| 9mm | 6mm | 12mm |
| 10mm | 7mm | 13mm |
| 11mm | 8mm | 14mm |
What size is 10mm spanner?
Metric Spanner Sizes
| Nominal Size | Spanner Size |
|---|---|
| M6 | 10mm |
| M7 | 11mm |
| M8 | 13mm |
| M10 | 17mm |
Is SAE imperial?
SAE (Society of Automotove Engineers) tool and fastener measurements are imperial, and are referred to as SAE to differentiate those sizes from nominally metric sizes.
Is a 5’8 the same as 15mm?
15mm = almost 19/32 inch. 16mm = 5/8 inch. 17mm = almost 11/16 inch. 18mm = just over 11/16 inch.
Is Sae the same as imperial?
What socket is M12?
SOCKET HEAD CAP SCREW – METRIC
| Size | Diameter | Hexagon Socket Size |
|---|---|---|
| M10-1.50 | 10.00 | 8.00 |
| M12-1.75 | 12.00 | 10.00 |
| M14-2.0 | 14.00 | 12.00 |
| M16-2.0 | 16 | 14.00 |
What are the different sizes of the Spanner?
Imperial and Metric Spanner Sizes BOLT DIAMETER (INCHES) AF SPANNER SIZE (INCHES) SPANNER SIZE (MM) 9/16 INCH 7/8 INCH 22.22 MM 5/8 INCH 15/16 INCH 23.81 MM 1 INCH 25.40 MM 1.1/16 INCH 26.93 MM
Can you use a metric spanner for an Imperial socket?
You may often want to substitute a metric spanner or socket for an imperial one or vice versa. Most commonly you will have an imperial set of tools available that has a granularity of 1/32 of an inch (or maybe even as low as 1/16 of an inch).
What is the equivalent of 3mm in imperial size?
Metric to Imperial Conversion Table Metric Length Decimal Equivalent Closest Imperial Size Decimal Equivalent 3mm 0.1181’’ 16 0.1250’’ 4mm 0.1575’’ D 0.1562’’ 5mm 0.1968’’ W 0.1875’’ 6mm 0.2362’’ 4 0.2500’’ 8mm 0.3149’’ E 0.3125’’ 10mm 0.3937’’ 7 0.3750’’ 12mm 0.4724’’ 1 0.5000’’ 16mm 0
What does the size on a Whitworth Spanner mean?
The size marked on a Whitworth or B.S.F (British Standard Fine) spanner refers to the size in inches of the threaded portion on the bolt it fits. Both Whitworth and British Standard Fine were phased out by the 1960s,but some manufacturers carried on using both on applications much later than this.