What tools do you need to change rear brake pads?

What tools do you need to change rear brake pads?

What Tools Do You Need To Change Brake Pads and Rotors?

1. Ratchet and Socket Kit. To fix your vehicle, you must have a socket set.
2. Torque Wrench. A torque wrench is a must.
3. Brake Pad Spreader or C-Clamp.
4. Torx / Allen Set.
5. Brake Bleeder Wrench.
6. Jack and Jack stands.
7. Lug Nut Wrench.
8. Gloves.

How do you change an emergency brake cable?

1. Insert the front end of the cable in the hole in the body and push.
2. Using the screwdriver, pry the cable clip up and in until it locks in place.
3. Slide the new cable into the groove on the pedal assembly and seat firmly.
4. Pulling the slack out of the cable as you go, re-secure all clips and clamps previously removed.

How do you release the parking brake on a Dodge Ram 1500?

The Ram 1500 does have a release lever, but it’s built to look like a part of the truck’s trim. You’ll find it directly above the parking brake. JuSTStick Your fingers behind the “dashboard trim”, and pull forward., This is the parking brake release, and pulling it will disengage Your parking brake.

How long does it take to change rear brake pads?

Usually, changing a set of brake pads takes approximately 30 minutes to an hour. If you have a professional complete the work, expect to pay for about an hour’s worth of labor. It’s worth pointing out that, as an amateur, it could take you upwards of 3 or 4 hours (maybe even longer) to replace your brake pads.

How do you change rear brake pads?

Project step-by-step (11)

1. Remove the Rear Wheel. Start the process by placing wheel chocks in front of the front wheels.
2. Remove Bolts from Caliper Brackets.
3. Remove the Brake Pads.
4. Reattach Caliper Bracket.
5. Seat the New Brake Pads.
6. Remount Wheel.
7. A Note on Safety.