When was Kirkfield lift lock built?
1907
Kirkfield Lift Lock
| Waterway | Trent-Severn Waterway |
|---|---|
| Operation | Hydraulic |
| First built | 1907 |
| Latest built | 1969 |
| Length | 42.4 m |
How high is the Kirkfield Lift Lock?
The historic Kirkfield Lift Lock is located a few kilometres north of the Village of Kirkfield. The Kirkfield Lift Lock is the second highest hydraulic lift lock in the world with a lift of 15 metres (49 ft). The lock is situated at the highest point along the Waterway at 256.20 meters (840.5 ft) above sea level.
How does a lift lock work?
The lock operates on a balance system, whereby water is let into the upper chamber, a connecting valve is opened and the heavier chamber automatically descends, forcing up the lower chamber to start a new cycle.
What is the highest lift lock in the world?
Peterborough Lift Lock on the Trent Severn Waterway, Ontario Canada is not only the highest lift lock in the world but it was completed in 1904 … that’s over 114 years ago… Lock 21 raises boats 65 feet – SIX STORIES!!! – an amazing engineering feat from back in the day when the average lock raised a boat 7 feet.
What’s the point of canal locks?
Locks are used to make a river more easily navigable, or to allow a canal to cross land that is not level. Later canals used more and larger locks to allow a more direct route to be taken.
Why were the lift locks built?
Built between 1896 and 1904 by Richard B. Rogers, the Peterborough Lift Lock was the largest construction project to canalize the Otonabee River on the Trent-Severn Waterway. The structure was built to allow the Kawartha Lakes to connect with Peteborough’s commercial centre.
How old is Peterborough Lift Lock?
117c. 1904
Trent-Severn Waterway, Lock 21 – Peterborough Lift Lock/Age
Which country invented canal locks?
China
The canal lock was developed in China, and first used in Europe during the Middle Ages. Locks enable ships to go from one water level to another, thus making many more transportation routes possible.
What canal is the lift lock on?
Trent Canal
The Peterborough Lift Lock is a boat lift located on the Trent Canal in the city of Peterborough, Ontario, Canada, and is Lock 21 on the Trent-Severn Waterway….Peterborough Lift Lock.
| Length | 43 metres (141 ft) |
| Width | 10 metres (33 ft) |
| Fall | 19.8 metres (65 ft 0 in) |
| National Historic Site of Canada |
|---|
Who designed the Peterborough lift locks?
Richard Birdsall Rogers
10. Peterborough’s Richard Birdsall Rogers (aka R.B. Rogers)—a civil and mechanical engineer from Peterborough who studied at McGill—oversaw the design and construction of the Lift Lock.
Where is the Kirkfield Lift Lock?
The historic Kirkfield Lift Lock is located a few kilometres north of the Village of Kirkfield. The Kirkfield Lift Lock is the second highest hydraulic lift lock in the world with a lift of 15 metres (49 ft). The lock is situated at the highest point along the Waterway at 256.20 meters (840.5 ft) above sea level.
Where is Lock 36 on the Trent Canal?
It is designated “Lock 36” of the Trent–Severn Waterway, situated at the highest section of the canal (256.2 m). It is Canada’s second lift lock, the other one is the Peterborough Lift Lock, located on the same canal system. Construction of the lock took place between 1900 and 1907.
Who invented the lift lock?
It was contrived by Richard Birdsall Rogers, a Canadian engineer, who adopted the design of the Lifts on the old Canal du Centre in Belgium. The concept of the hydraulic lift lock had never been implemented in the harsher Canadian climate prior to the construction of the Peterborough Lift Lock, also designed by Rogers.