Where is OBD port Honda Accord?

Where is OBD port Honda Accord?

OBD connector location for Honda Accord 8 (2007 – 2015)

1. The OBD2 socket is located under the steering wheel in the fuses box.
2. OBD socket is near the hood lever.
3. You can see the diagnostics port near the fuses.

Where is the OBD connector on a Honda Civic?

OBD connector location for Honda Civic 10 (2016 – …)

1. The OBD II socket is located above the pedals.
2. The OBD II port is visible on the top left of the pedals.
3. Here is the OBD II port.

Where is the OBD port on a 2018 Honda Civic?

The OBD II port in a 2018 Honda Civic is located below the kick panel on the driver’s side, right next to the fuse box. The OBD II port, or on-board diagnostic is hard wired to the computer.

Where is the DLC located?

The OBD II DLC is usually located under the instrument panel on the driver side, though there are several exceptions. The OBD-II connector is required to be within 2 feet of the steering wheel (unless an exemption is applied for by the manufacturer, in which case it is still somewhere within reach of the driver).

Where is the OBD2 port on a 2013 Honda Civic?

The OBD connector is located under dash on left side of vehicle above gas pedal on right of steering column.

Where is the OBD reader on a 2006 Honda Civic?

The 2006 Honda Civic OBD port location can be found under the pedals to the right in the driver’s side footwell. The OBD port will allow You to connect a diagnostic tool to the vehicle and get fault errors.

Where is the obd2 port on a 2013 Honda Civic?

What does the diagnostic trouble code DTC mean on a Honda?

When the Powertrain Control Module ( PCM) does not receive the signals from the Gauge Control Module via the F-CAN lines for a set time, the PCM detects a malfunction and stores a Diagnostic Trouble Code (DTC). | Need more information with the U0155 HONDA code?

How do I find the DTC code on my Honda TPMS?

Use the VT56 to retrieve Honda TPMS DTC codes for direct TPMS systems by selecting the “Service” icon. After selecting the Make, Model, and Year, select the DTC code icon. Use the OBDII module to retrieve the Honda DTC TPMS information to diagnose and service the TPMS issues determined.

What should I do if my DTC doesn’t reset?

If the DTC doesn’t reset, you’re done. If it does, then continue with normal troubleshooting. Keep in mind, some systems (like audio and navigation with volatile memory) will lose all stored data when you disconnect the battery. So make sure you’ve got the anti-theft codes and write down the audio presets before doing that.

What do the numbers in the DTC column mean?

The number of long flashes indicates the number in the 10s column. The number of short flashes indicates the number in the 1s column. For example, 3 long flashes followed by 1 short flash would indicate DTC 31.