Who makes Viking popup campers?
Forest River
The Viking camping trailers are manufactured today in a Centerville, Michigan, manufacturing facility, and owned by Forest River.
How do you lubricate a pop up camper lift system?
Lube each pulley with a dry lube like silicone spray (there are a few in the lift posts also). Lower the top all the way and remove the whiffle tree cover (by the crank) clean all the old dirt and grease off, re-lube with a heavy grease of your choice.
How does a Goshen lift system work?
The Goshen Lift system Within the tube is located a simple mechanism that utilizes one pulley to push four heavy duty springs through tubes routed to each corner of the trailer. As the springs are pushed through the tubes, the corners of the roof are pushed to the open position.
How do I fix pop ups?
How to Stop Pop-Ups in Google Chrome
- Select Settings from the Chrome menu.
- Type ‘pop’ in the search bar.
- Click Site Settings from the list below.
- Scroll down and click Pop-ups and redirects.
- Toggle the Pop-ups and redirections option to Blocked, or delete exceptions.
Can you lift a pop up camper?
as far as lifting the camper, HOW you do it depends on what the axle set up is on your camper. If you’re axle is above the spring pack, you can do a “spring over” and remount the axle under the spring pack, this can gain you upwards of 4″ of lift. there are various kits depending on one axle configuration.
How much does a 2001 Viking pop up camper weigh?
1693 lbs
Pop up camper with two end beds, booth dinette and small kitchen area….Professional.
| Sleeps | 6 |
|---|---|
| Length | 20 ft 8 in |
| Dry Weight | 1693 lbs |
| VIN | 1TV1C550315000303 |
What kind of maintenance does a pop up camper need?
Annual RV Maintenance For Your Pop Up Camper
- Clean or Change Filters in your AC.
- Inspect Roof Seams and Seals.
- Clean the Exterior of Your Camper.
- Clean the Interior of Your Pop Up Camper Canvas.
- Clean and Treat the Exterior of Your Pop Up Camper Canvas.
Do Viking pop-up trailers have lifts?
Viking pop-up trailers are very popular in the camping community. The lift systems are simply designed, but they will fail after years of use or if not properly maintained. The majority of Viking campers use a Goshen-style lift. This system uses a cable on pulleys to raise the camper on springs.
How do you install a lifter cable on a camper trailer?
Thread the camper’s new lifter cable through a new swage sleeve. Loop it through the eye bolt and back through the other side of the sleeve. Do not crimp yet. Route the other end of the cable through the floor track to the drive slug, and crimp it in place. Install the rod spring and inward side screw.
How do you fix a broken Jayco camper roof lift cable?
When the roof lift system fails, the problem is usually a broken cable or cable attachment. Most do-it-yourselfers can repair Jayco camper cables with minimal expense and a few household tools. Stabilize the camper with jacks and wheel chocks. Raise the roof to the proper height.
How do you fix a broken cable on a travel trailer?
If the cable does not have any resistance, it is broken and must be replaced with a new cable. Access the undercarriage of the trailer. Remove the main tube that runs the length of the trailer. Check the cable for jams. Check the pulleys for damage. Replace any damaged pulleys.