Why does Xbox 360 keep saying open tray?

Why does Xbox 360 keep saying open tray?

“Xbox 360 open tray error” could be caused by an incorrect disc tray controller calibration. If your Xbox 360 has a warranty, send it back to Microsoft for repair or temporarily fix it. Try to close the disc tray manually so the disc tray controller will recalibrate itself. Power off your Xbox 360.

How do you put a Xbox 360 disc tray back in?

If the disc drive is still stuck closed, insert the paper clip into the adjacent hole (to the right) and push again. If you’re successful, the disc tray will pop out slightly. Plug the power cord into the back of the console. Press the eject button to open and close the disc drive.

How do you pop an Xbox 360 disc tray to open?

Insert a large paper clip into the eject button hole and push it in about an inch and a half. This should cause the tray to open a bit, and your can open the tray fully with your hands. Ensure the disc in the system isn’t sticky or gooey, causing the tray to jam.

Why is my Xbox 360 not reading my disc?

The major contributing factor to a disc read error is a dirty optical lens (the one that your Xbox 360 laser passes through to read the disc itself). If there is dirt or dust on the laser lens, your system will eventually fail to read the game disc.

How do you manually eject a disc from Xbox one?

Press and hold the Xbox button  in the center of your Xbox controller to open the Power Center. Select Restart console. Select Restart. After restart, press the eject button next to the disc slot to remove the disc.

How do you eject a disc from an Xbox 360 controller?

How do I fix my Xbox 360 not reading discs?

CleanDr is the go-to solution for repairing and cleaning both the Xbox 360 and Xbox One laser lens. Here’s how it works. Simply insert the CleanDr disc into your Xbox 360 or Xbox One DVD tray (with the graphics side facing up). It will automatically play.

How do I put a disc in the Xbox One tray?

So what you’ll want to do is first, open the tray and put a disc in. Then close the tray and start gently knocking on the xbox right above where the disc is inside the xbox. Now keep repeating this until it works. It could take a while, but it could not. You might want to try this to for like 5 minutes.

What is the open tray error on Xbox 360?

If your like me, you obviously have and xbox 360 that has or has had the “open tray error”. This error is when you have a disc in your xbox 360 and it doesn’t “see” it and it displays the message “open tray” as if there isn’t a disc in your xbox.

How do I put a disc in the disc tray?

One way is open the disc tray then turn the console off holding the disc tray so it does not go into the Xbox. You then switch your Xbox off and wait ten seconds you then switch it back on. After it turns on put the disc in the tray and you can now play your game enjoy Was this answer helpful? WARNING THIS MAY NOT WORK FOR YOURS.

Why is my Xbox 360 stuck on the disc tray?

In some cases, the hardware might get clogged due to the accumulation of certain dust particles inside the Xbox or in and around the cables. Therefore, if you haven’t tried it already, it is always a good choice to try to clean the Xbox Disc Tray, the Disc, and all the power cords and other cables connected to the console.