Why is my computer not showing my DVD drive?

Why is my computer not showing my DVD drive?

Restart the computer and Windows should auto-detect the drive and reinstall the drivers for you. If your hardware is not even showing up in the Device Manager, then you may actually have a hardware problem, such as a faulty connection or a dead drive. It’s worth checking this option out if the computer is old.

How do I enable my DVD drive?

How to enable the DMA settings of a hard disk drive, CD-ROM, CD-R/RW and DVD-ROM drive?

1. Start Control Panel.
2. Double-click System.
3. Click the Device Manager tab.
4. For hard disk drive, click to expand Disk Drive.
5. Right-click on the necessary drive and click Properties.
6. Click the Settings tab.
7. Select the DMA option.

How do you fix a DVD that is not recognized?

What can I do if the DVD driver for Windows 10 is not detected?

1. Delete the IDE ATA/ATAPI controllers from Device Manager.
2. Create new registry keys.
3. Check if your DVD drive is properly connected.
4. Set your DVD drive as the first boot device in BIOS.
5. Remove Virtual Drive Software.
6. Use the Hardware Troubleshooter.

Why is my CD player not reading discs?

Unplug the power cord of the CD player from the AC outlet for 30 seconds. Turn on the CD player and attempt to play the disc. If the issue is still not resolved, remove the disc and unplug the power cord from the AC outlet. Let the CD player remain without power for 1 hour in case of condensation.

Why does my DVD player not work on my computer?

Verify its capability to read DVD disc. Usually,you need to make sure that if your computer has been equipped with a drive,make sure that the drive

If step 1 is true,try to restore your computer to factory defaults if you encounter the problem that DVD disc cannot be read properly.

Call tech support for DVD disc issues.

Why is my DVD drive not working?

A CD-ROM or other disc drive that is not working can be caused by a loose interface connection, drivers not loading properly, virus, or the drive or CD attempting to be read being dirty.

Why did my CD drive stop working?

Check Device Manager. Open the Control Panel. Click or double-click the System icon.

Corruption in Windows. Try testing the CD-ROM in Safe Mode.

Try booting a CD or bootable diskette. If you attempted the recommendations above, boot from the Windows disc to see if the computer can detect and boot from the disc.

Why is my CD player not working?

CD Player not working. Installing or uninstalling software on your computer, or upgrading your Windows operating system, can sometimes cause the CD or DVD drive to stop working. This is usually because something happened during the installation that caused a problem with the CD or DVD filter drivers. To enable your CD/DVD Drive again.