Why is my Fisher and Paykel washing machine not working?

Why is my Fisher and Paykel washing machine not working?

Switch the power off at the socket, wait 60 seconds and switch on again (this may reset your washer). Either test the socket by plugging in a different appliance, or by plugging your washer into a different power socket. Keylock mode may be activated. Try holding down the POWER button for 2 -3 seconds.

Why does my Fisher and Paykel washing machine keep going out of balance?

Too much water for the load Ensure an appropriate water level is selected for the load size (or select ‘Auto’ water level). Selecting a water level that is too high can cause out of balance loads, tangling or splash-over. Try selecting a water level suitable for the load size.

What are the four trouble symptoms of washing machine?

7 Common problems with washing machine

• Washing machine not starting.
• Washing machine is noisy.
• Excessive vibrations during operation.
• Washing machine making noise when draining or not draining at all.
• Washing machine over-filling or under-filling.
• Washing machine not spinning.
• Water leaking from soap drawer.

How do I reset my Fisher and Paykel washing machine?

Factory Reset

1. Turn the dial to select ‘Spin’.
2. Touch and hold the ‘Delay Start’ ‘More’ , the ‘Delay Start’ ‘Less’ and ‘Options’ buttons together for 3 seconds will appear on the screen and the machine will beep.
3. Your washer will now be reset to the default settings.

How do I reset my Fisher and Paykel top loader washing machine?

You can reset your washer to the settings it left the factory with:

1. Enter Option Adjustment mode (refer to ‘Option Adjustment’).
2. Select the ‘Delicate’ cycle.
3. The display will show . Touch and hold for 3 seconds to reset your washer to its factory settings.

What does out of bAL mean?

1 : not well proportioned : out of balance the plans are off-balance their military is off-balance. 2 : not standing, sitting, or resting in normal physical equilibrium caught off-balance and knocked down— Jack Dempsey.

Why does my Fisher and Paykel washing machine keep beeping?

Your machine is checking that the water has drained before spinning. Your washer will beep if you have used ‘No Spin’ and at the end of the cycle. If your machine is beeping continuously or giving a musical series of beeps, refer to the ‘Before you call for service’ section.