How much does a LM2500 cost?
General Electric LM2500
| Engine Type: | Twin-spool, axial-flow, 50/60 Hz industrial & marine gas turbine and gas generator |
|---|---|
| Power Rating: | From 23-37 MW (single cycle) |
| Status: | In Production (LM2500, LM2500+, LM2500+G4, TM2500) |
| Manufacturer: | General Electric Co. |
| Price/Unit Cost: | $11.4 million (LM2500+G4 for electrical gen.) |
What is LM2500 engine developed from?
CF6-6 aircraft engines
Derived from GE’s CF6-6 aircraft engines, the LM2500 consists of a gas generator, a power turbine, attached fuel and lube oil pumps, a fuel control and speed governing system, associated inlet and exhaust sections, lube and scavenge systems as well as controls and devices for starting and monitoring engine operation.
How does a LM2500 gas turbine work?
The LM2500 gas turbines drives controllable pitch propellers through a conventional main reduction gear, shaft and clutch. A 16 stage axial flow (air travel is parallel to the shaft) compressor increases the pressure and temperature of the working mass (air).
How much is a GE turbine?
With regard to power generation installed costs, GE’s new turbines are within the $500 to $700 per kilowatt range, said DeLeonardo, while renewables are around $1,500 per kilowatt and nuclear can be $5,000 per kilowatt.
What is marine gas turbine?
Derived from GE’s CF6-6 aircraft engine, the 25 MW marine gas turbine consists of a gas generator, a power turbine, attached fuel and lube oil pumps, a fuel control and speed governing system, associated inlet and exhaust sections, lube and scavenge systems, as well as controls and devices for starting and monitoring …
How many gas fuel pre mixer cups does a LM2500 DLE has?
The two cup premixer assemblies of the LM2500 and the LM6000 combustors have the ELBO circuits in both the outer and the middle dome premixers.
What is SAC gas turbine?
Dry low emission (abbreviation DLE) is a technology that reduces NOx emissions that exhausts out of gas fired turbines. The SAC turbine has one single concentric ring where the DLE turbine has two or three rings with premixers depending on gas turbine type.
What is a Frame 7 gas turbine?
The Frame 7/1EA gas turbine is well-proven for its energy efficiency, availability, reliability, and maintainability. It’s a fuel-flexible turbine that can operate on natural gas, liquefied natural gas (LNG), distillate, and treated residual oil in a variety of applications.
What is the difference between LM2500+G4 and LM2500?
GE’s LM2500+G4 aeroderivative gas turbine is the fourth generation of the industry standard -setting LM2500 marine gas turbine. The LM2500+G4 main features are increased power (17%) compared to the third generation LM2500+, the same high reliability and availability and the same high efficiency (lower SFC).
What is the shp of the LM2500+G4 gas turbine?
The LM2500+G4 gas turbine provides 47,370-shp, and is the most powerful and efficient member of the LM2500 family.
What is an LM2500 engine?
Derived from GE’s TF39 and CF6 -6 aircraft engines, the LM2500 consists of a gas generator, a power turbine, attached fuel and lube oil pumps, a fuel control and speed governing system, associated inlet and exhaust sections, lube and scavenge systems as well as controls and devices for starting and monitoring engine operation.
How many interconnects does the lm2500xpress have?
The LM2500XPRESS comes pre-packaged in 10 simplified modules for easy install and features 25 electrical interconnects vs. 130+ for a traditional plant, as well as minimal mechanical interconnects. Module systems flushing is completed at the factory, so customers don’t need to flush on-site.