What is an EPS connector?
The EPS connector is meant to supply power to a motherboard cpu socket while the PCI express connector is meant to supply power to a GPU. You shouldn’t be able to switch between them – the square and rounded off connectors are arranged such that you can’t.
What is EPS on power supply?
Entry-Level Power Supply Specification (EPS), which is a derivative of the ATX specification, was released for high-end PCs and entry-level servers. It was developed and released by the Server System Infrastructure forum.
What is the difference between ATX and EPS?
ATX power supplies contain an additional 4-pin +12v connector called a P4 connector. EPS power supplies have an 8-pin +12v EPS connector that’s essentially two P4 connectors combined.
Is ATX12V needed?
This connector is used to supply additional 12V current to the motherboard. While the system will likely still run without it, higher current demands such as extreme overclocking or large video card current draws may require it. “
What does EPS stand for PC?
(1) (Evolved Packet System) See LTE. (2) (Encapsulated PostScript) A PostScript file format used to transfer a graphic image between applications and platforms. EPS files contain PostScript code as well as an optional preview image in TIFF, WMF, PICT or EPSI, the latter being an ASCII-only format.
What is ATX12V used for?
The power coming from this connector is usually used to power the CPU but some motherboards use it for other things as well. The presence of this connector on a motherboard means it’s an ATX12V motherboard. For dual 12 volt rail power supplies, this connector provides the voltage referred to as 12V2.
Do I need to plug 4 pin motherboard?
4 pin is for extra stability when overclocking etc. It is not necessary to use the additional 4 pin connector if you’re not pushing the board or CPU too hard. Basic everyday computing and gaming won’t require it. It’s definitely not needed for normal operation or even a slight overclock.
Can I use 8 pin CPU on GPU?
So in theory the card should be absolutely fine. For reference, if the card has just an 8-pin connector, then if you powered it with an EPS12V, it would have been exposed to -12V which would have almost certainly have caused it to fry – and would probably also have taken the motherboard out along with it!
Can you use a 6-pin on a 8 pin motherboard?
No, the 6+2 pin is for pcie supplementary power, it’s for GPU power basically the 8 pin on the mobo is for cpu power. Your power supply should have either a 4+4pin or a 4pin for cpu power, use that.
What is a 4 pin connector?
The ATX 4 pin power supply connector is a standard motherboard power connector used to provide +12 VDC to the processor voltage regulator.
What is 8 pin EPs?
The EPS connector is the 8 pin connector, which is rated for twice the power (288W). The 4 pin connector is sometimes called the P4 connector. Jan 9, 2017, 1:43 AM. blazorthon said: 8 pin is rated to safely deliver twice as much power as 4 pin for CPU power connectors, 288W versus 144W IIRC.
What is an EPS cable?
EPS is for the CPU power on the mobo , PCIE is for the 8-pin power going into the GPU. They are not the same cable, and will not fit if you try to put one into the wrong one. When in doubt, re-format. Eps for the cpu/mobo, pcie for gpu.
What is a power supply cable?
A power cord, line cord, or mains cable is an electrical cable that temporarily connects an appliance to the mains electricity supply via a wall socket or extension cord.