What is the back yoke of a shirt?
Definition- This is a piece of fabric that connects the back of a garment to the area across the back shoulders, allowing the garment to lie flat while following the reliefs of the body, ensuring correct drape and appearance.
What is a front and back yoke?
If a shirt, blouse or dress has a separate pattern piece for the shoulder area that attaches to the front or back of the garment, this piece is calles a yoke. A yoke can be in the front or back shoulder area only. Oftentimes, you’ll find that there is a combined piece for the back and the front without a shoulder seam.
How do you measure the yolk of a shirt?
Button up the shirt and spread the shirt out on its front. Measure for the point where the yoke meets the sleeve, straight across, to the same point on the other side. When taking this measurement, pull the two ends of the yoke tight but don’t stretch it.
What are back darts?
Back darts are two simple straight seams, i.e. a fold and stitch on either side on the back of your dress shirt. What this means is that additional fabric in the back of the shirt is folded inwards and then stitched, leaving a pinch showing on either side of the back of the shirt.
Do Shirts need a yoke?
Traditionally, the yoke serves to provide support for shirt fabric around the shoulder and upper back for men’s shirts, and allows the fabric at the shoulder to lay comfortably under a suit jacket, shifting the seam off the top of the shoulder.
What is back yoke depth?
Center Back Yoke Depth – at CBN, measure straight down from neck seam to yoke seam. Cuff/ Sleeve Hem Height – Measure from seam or stich line to cuff edge.
What are back pleats?
Rear side pleats, also sometimes called “knife pleats,” are placed just below the yoke, out towards the ends of the shoulders. Each pleat is 0.5” wide. Selecting rear side pleats will add a total of 2″ of additional fabric to the upper back of the shirt while keeping the yoke and chest width the same.
Why do shirts have yokes?
It is essentially the piece of the garment that behaves as a hanger, and creates the crisp lines of the shirt’s backside. If a yoke is not well-made, it can cause gathering of the fabric in the center of the back, which makes the back look pinched, and often cheapens the entire look of the dress shirt.
What are yokes in reference to clothing?
A yoke is a shaped pattern piece which forms part of a garment, usually fitting around the neck and shoulders, or around the hips to provide support for looser parts of the garment, such as a gathered skirt or the body of a shirt. Yoke construction was first seen in the 19th century.
What is a split yoke shirt?
The split yoke. The value of a split yoke is that it enables the shirtmaker to cut the front panel of the shirt and the shoulders at a different angle in the weave. The front of a shirt will always be cut on the bias, to give it greater flexibility and fit. If the shoulder is also cut on the bias, both will be aligned and the shoulder seam,…
What are the parts of a shirt?
First, Shirt parts are made. Parts making: Collar, Cuff, Pockets, Front part, and Sleeves are made separately. Main label (Brand labels) is attached inside back yoke or collar band during part preparation. Assembly: Once different parts of a shirt are made, shirt parts are assembled.