How do I factory reset my foscam?
Reset button location: 1. On Indoor PT cameras the Reset button is located either on the bottom of the camera in a little hole or is on the side of the body. Use the end of a paperclip to press the button.
How do I reset my foscam fi9821w?
Figure 1.3 Reset button: Press and hold down the RESET BUTTON for 5 seconds. Wait for 20 seconds after released, the IP camera will reboot and it will be reset back to factory default settings.
What is default password for Foscam?
The default password for most Foscam cameras is indicated as ‘admin’ but may vary depending on the different models. If you are not sure, you can always check your user manual for detailed information.
Why is my Foscam not connecting?
Disable the router’s firewall or change the blocking rules. Check if your Internet link has enough bandwidth. Log in to the device and check the port number it’s using. Log in to the Foscam App and check if the configuration is correct.
How do I log into my Foscam camera?
Press the Enter key. The login page for the camera should appear on the browser window. Enter the username and password for the camera. If this is the first time the camera is being logged into the default username is Admin followed by a blank password.
How do I connect my Foscam to Wi-Fi?
How to connect a Foscam HD Camera to a wireless router?
- Step 1: Login the camera from Foscam VMS or web browser.
- Step 2: Go to Settings–> Network–> WiFi to configure the wireless connection.
What do I do if my P2P status is offline?
Annke Vision – What to Do If P2P Status Shows Offline? (S500…
- Make sure the receiver is connected to a router via ethernet cable.
- Go to Setting- Network- General, tick on ‘DHCP’ and “Obtain DNS automatically”, then click ‘Apply’.
- Go to ANNKE Vision, tick on ‘Enable’.
What are the features of the Foscam fi9821w V2 megapixel wireless IP camera?
The Foscam FI9821W V2 Megapixel Wireless IP Camera features high definition 1280 x 720p video resolution, h.264 video compression, built-in DVR via SD card (upto 32gb), two-way audio, wifi-N capability, pan/tilt, remote internet viewing, motion detection, night-vision as well as network video recording…
How do I upgrade the firmware on my fi9821w camera?
Just go to System > Choose file > Select the FI9821W_app_ver1.1.1.1.14.bin file and click System Upgrade. Wait for the reboot and you should be all set. You can assign a static IP address so you can keep track of the camera now.
What is the warranty on my Foscam wireless camera?
Foscam.us does not provide support or warranties on behalf of any Foscam cameras purchased directly from China and sold on Amazon, Ebay, or other through other resellers. We guarantee that your Foscam wireless camera will be 100% functional or we will issue you an immediate replacement.
How does the fi9821w V2 improve on the fi8910w?
The FI9821W V2 improves on the FI8910W by adopting high performance media and video processors capable of H.264 video compression which allow for ultra-smooth high definition video transmission, increased FPS and minimal bandwidth consumption. In addition, due to the small file sizes produced by H.264 video…