How do you fix a fuser on a Lexmark printer?

How do you fix a fuser on a Lexmark printer?

Replacing the fuser

1. Turn off the printer, and then unplug the power cord from the electrical outlet.
2. Open doors A and D.
3. Remove the fuser.
4. Unpack the new fuser.
5. Insert the new fuser.
6. Close doors D and A.
7. Connect the power cord to the electrical outlet, and then turn on the printer.
8. Reset the fuser maintenance counter.

How do I reset my Lexmark fuser?

Press and hold and while turning the printer on. Release the buttons when the clock appears. CONFIG MENU appears on the first line of the display. Press until you see Reset Fuser Cnt, and then press .

How do you change a Lexmark fuser?

Solution

1. Power off the printer.
2. Open the left side cover (also called door A).
3. Turn the two thumbscrews at each end of the fuser counter-clockwise.
4. Lift out each of the fuser hooks.
5. Using the fuser hooks, carefully pull the fuser unit out of the printer.
6. Remove the new fuser unit from the packaging.

What is a fuser on a Lexmark printer?

The fuser unit/fuser assembly is the part of the printer that heats up to melt or “fuse” the toner onto the page. The fuser unit is located at the back of the printer, just inside the rear exit door. The fuser unit can be replaced separately or as part of the maintenance kit.

What is a service fuser error?

A Service Fuser message means that the printer has detected some sort of problem with the fuser unit installed on this printer. The fuser unit is the part of the printer that heats up to fuse the toner onto the page. The meaning of the fuser error depends on the error code number associated with it.

How do you change a fuser?

Follow the steps below:

1. Press the Power button to turn off the printer.
2. Open the Top Cover.
3. Unscrew the two long screws as shown to release the Fusing unit from the printer.
4. Remove the Fusing Unit from the printer by holding the handles on both sides.
5. Remove the Oil Bottle and the Fuser Cleaner from the Fusing Unit.

What is a printer fuser?

The fuser unit is a very important component of laser printers. The fuser unit, which is essentially two heated rollers, uses pressure and heat to fuse the toner powder onto the paper. Depending on your printer model, the fuser unit may be sold separately or it may be included in the printer’s maintenance kit.

What is a printer fuser error?

A Service Fuser message means that the printer has detected some sort of problem with the fuser unit installed on this printer. The fuser unit is the part of the printer that heats up to fuse the toner onto the page. If the fuser error returns, you can try reinstalling the fuser unit.