Why is my Hotpoint washing machine not spinning?
Common solutions for: Hotpoint Washer won’t spin. The lid switch assembly prevents the washer from spinning when the lid is open. If the lid switch assembly fails, the washer will not spin. If the washer is overloaded, the motor coupling will fail in order to protect both the motor and transmission.
How do I reset a Hotpoint washer?
Motor Reset Procedure:
- Unplug the washer for 1 minute from the electrical outlet.
- Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid.
- The motor has now been reset and is ready for you to start a cycle.
What is the problem if the washing machine wont spin?
Normally, your washing machine won’t go into a spin cycle until it’s been drained. The drainage hose may become clogged with debris from your clothing, or it could be kinked. If the hose is kinked or crushed, it will likely need to be replaced.
Why is my machine not spinning?
An imbalanced drum is a common reason for your machine not spinning. The easiest way to avoid an imbalanced drum is by making sure you don’t overload your washing machine, or if you have one large piece of laundry, add smaller pieces to balance out the load. You may also need to check that your machine is level.
Where is the coin trap on a top load Hotpoint washer?
Inside the center agitator: If you have a top-loading washer, inspect the center agitator. The cover may be removable, revealing a lint trap inside. At the end of the drainage hose: A small mesh screen may be fitted onto the end of the hose that drains water out of the machine.
Why isn’t my washing machine spinning?
Drain pump blockage One of the most common reasons why your washing machine has stopped spinning is when it can’t drain properly due to a blocked drain pump. This can happen when something gets stuck in the outlet pipe, preventing the steady flow of water in and out of the machine.