How do I install AstroStart?

How do I install AstroStart?

Get AstroStart SmartStart in 3 easy steps.

1. Download the. AstroStart SmartStart App.
2. Get AstroStart SmartStart Installed in Your Car.
3. Set Up Your AstroStart SmartStart Account.

How do I set the time on my Code Alarm Remote?

Adjusting the Clock and Timer Settings: The clock, alarm clock and programmable countdown timer are accessed through the Function Menu. Press and hold F for 3 seconds to access the function menu, once you have accessed the feature menu press and release F to scroll through each feature.

How do you use Python starter?

Python Remote Car Starter Instructions for Reset

1. Sit in the driver’s seat and close all of the doors.
2. Press and hold the “Unlock” button on the fob for one to two seconds, and release it.
3. Hold down the “F” button until the fob’s indicator light glows red, and release it.

How do I reset my alarm code?

Reset user code: Enter the master code and enter *5, then enter the 2-digit number for that. Now type a new user code. Enter your 4-digit code to silence the alarm. Enter your 4-digit code once again and press the “Reset” button to clear the system fault.

How do I reprogram a remote in Python?

How to Program a Python Remote Start

1. Insert your key into the car’s ignition and lock all of the doors and the trunk behind you.
2. Turn the key in the ignition to the “On” position and press and hold the unlock button on your remote for one second to unlock the remote.

How do you set python alarm in valet mode?

Press and hold The alarm Arms (or Locks in Valet) and, after two seconds, sounds the siren/horn and flashes the parking lights. Press and release again to stop panic. Press and release The alarm disarms, doors unlock (if connected), and the siren/horn sounds and parking lights flash twice. Also turns panic off if on.

How do I reset my alarm after changing the battery?

You can arm the system by pressing the “Home” or “Away” button. The low-battery signal to the system will be illuminated by this action. The sensor number on the master console will be erased when the “Low Bat” indicator goes off.