What size paper is half letter?

What size paper is half letter?

8.5 by 5.5 inches
The related paper size known as half letter, statement, or organizer L is exactly one half of the US Letter size: 8.5 by 5.5 inches (215.9 by 139.7 mm) (8.5 × 5.5 in).

Does cardstock come in different weights?

Cardstock thickness is measured in terms of cardstock pounds. Here’s the catch: there is no typical cardstock weight, nor is there a perfect one-size-fits-all weight for every occasion. Even more confusing? A thick and a thin cardstock can both weigh 80 lbs.

What size is standard cardstock?

8 1/2 x 11 Card Stock Paper The standard size you know and love, shop hundreds of colors, finishes, and weights of 8 1/2 x 11 letter sized paper and card stock – sized perfectly for print!

What does the weight of cardstock mean?

Basis weight refers to the weight of 500 sheets (a ream) of card stock at its basic size. It’s expressed in pounds, and varies depending on the grade of that particular stock. For example, a basis weight of 80 means that a 500-sheet stack of that paper grade at its basic size weighs 80 pounds.

What size is half A4?

A5
For example, the dimensions of A4 paper are 210x297mm, and half of A4 equals A5, and double A4 equals A3. Starting from A0, all subsequent A paper sizes are determined by halving the paper on its longest size. A0 halves to become A1, which halves to become A2, all the way down to A10.

How do I print a half letter size?

Go into your word processor. Start a document. Go to File and “Page Setup. Look for the drop down menu that says “Paper Size.” Look for and select one of the following: Statement, Organizer L, Half-Letter.

How do I know the weight of my cardstock?

Standard Cardstock Weight In the U.S., card stock thickness is usually measured in points or mils which is the thickness of the sheet in thousandths of an inch. For example, a 10 pt. card is 0.010 in (0.254 mm) thick (roughly corresponding to a weight of 250 g/m^2, and 12 pt. is 300 g/m^2.

How do you know the weight of cardstock?

How to Measure the Thickness of Cardstock

1. Check the points on the card stock label — you may find a card stock point abbreviated as “pt.” Every point equals . 001 inch.
2. Divide the points by 1,000 to find the thickness or caliper.
3. Convert cover weight to points if the card stock label lists cover weight.