How do you make a nut in AutoCAD?

How do you make a nut in AutoCAD?

Tutorial – Making a Hex Nut in AutoCAD 2004?

1. Start AutoCAD.
2. Make a Polygon using polygon command with 6 side center at 0,0 circumscribed in a circle of radius 36mm.
3. Make a circle at origin of radius 20mm.
4. Use region command and select all and then press enter.
5. Views>>3D Views>SE Isometric.

How do you use Helix in AutoCAD?

A helix is an open 2D or 3D spiral.

1. Click Home tab Draw panel Helix. Find.
2. Specify the center point for the base of the helix.
3. Specify the base radius.
4. Specify the top radius or press Enter to specify the same value as the base radius.
5. Specify the height of the helix.

What is a draw bolt?

Definition of drawbolt 1 : coupler sense 1a. 2 : a bolt with washer and nut used to draw parts of an assembly tightly together.

What is the difference between nut and bolt?

A nut is a component that fits over the end of a bolt and helps it hold objects in place. A bolt is a non-tapered fastener that uses a washer and nut to hold objects together.

What is AutoCAD Helix?

Creates a 2D spiral or 3D spring. Find. Use a helix as a sweep path for the SWEEP command to create springs, threads, and circular stairways.

What is Donut command in AutoCAD?

A donut consists of two arc polylines that are joined end-to-end to create a circular shape. The width of the polylines is determined by the specified inside and outside diameters. A donut is drawn at each point specified until you press Enter to end the command.

What is nut in mechanical?

A nut is a mechanical fastener with a threaded hole. It is attached to a bolt, screw or stud to provide a clamping force and prevent axial movement. The force may act between the bolt head and the nut, causing compression of the parts being fastened.