How do I find my local NTP server?

To verify the NTP server list:

Hold the windows key and press X to bring up the Power User menu.
Select Command Prompt.
In the command prompt window, enter w32tm /query /peers.
Check that an entry is shown for each of the servers listed above.

Do I need a local NTP server?

Do I have to make an NTP server? No… absolutely not! If you’re satisfied with the clocks on your network having some unknown difference from the standard time (and each other), then you do not have to set up an NTP server.

How do I sync my PC time with NTP server?

Procedure

Open a command prompt.
Check time sync: w32tm /query /source.
List NTP server list: w32tm /query /peers.
Update the peer list: w32tm /config /update /manualpeerlist:SPACE_LIMITED_NTP_SERVERS /syncfromflags:manual /reliable:yes.
Force sync: w32tm /resync /rediscover.
Check if the server is now using NTP:

What is the NTP server configuration for Windows Server 2008 R2?

A Windows 2008 R2 Server acting as the NTP client for which it will source its time from the above server. This configuration is not based upon using a Windows Domain. 1. Enable the NTP Server

What is a Windows 2008 R2 Server?

A Windows 2008 R2 Server acting as the NTP client for which it will source its time from the above server. This configuration is not based upon using a Windows Domain.

Can I use the NTP server as a time source?

But make sure the Windows domain members work with the Windows way. So if the NTP server is an external or whatever time server (NOT domain member machine), configure the DC with the PDCEmulator FSMO to use it as a time source.

How do I set up an SNTP/NTP server in Windows?

Gee, setting up an SNTP/NTP server in Windows is not intuitive. The good news is: When configured correctly, you can use the Windows Time (W32Time) service as an SNTP/NTP server for both windows and non-windows SNTP/NTP clients. Here’s how to do it: Click Start, click Run, type regedit, and then click OK.