What is a 7W bulb equivalent to?
Lumen & Wattage Comparison
| Lumens (Brightness) | LED Watts (Viribright) | Incandescent Watts |
|---|---|---|
| 400 – 500 | 6 – 7W | 40W |
| 650 – 850 | 7 – 10W | 60W |
| 1000 – 1400 | 12 – 13W | 75W |
| 1450-1700+ | 14 – 20W | 100W |
What is the LED equivalent of a 40 watt bulb?
Compare wattage
| Traditional bulb1 | Halogen2 | LED |
|---|---|---|
| 40 watts | 25 watts | 5 watts |
| 60 watts | 40 watts | 7 watts |
| 75 watts | 45 watts | 9 watts |
| 100 watts | 60 watts | 12 watts |
What is an R 40 bulb?
What are R/BR40 Bulbs? Reflector (R) or Bulged Reflector (BR) 40 bulbs have a reflective coating on the inside of the bulb that directs light forward. Like all light bulbs, the 40 value represents the diameter of the bulb in 1⁄8 of an inch. Therefore, a R40 is 5 inches in diameter.
What is a 7.5 watt LED equivalent to?
LED equivalents to traditional incandescent light bulbs
| Incandescent Light Bulb Wattage | LED Equivalent Wattage |
|---|---|
| 100 Watt | 10 Watt |
| 75 Watt | 7.5 Watt |
| 60 Watt | 6 Watt |
| 50 Watt | 5 Watt |
Can I replace a 40W bulb with a 60w LED?
Yes, assuming you’re suggesting an LED that has lumen output similar to a 60 watt lamp. You can use any lamp that consumes up to 40 watts and is shaped similar to the lamp recommended. So for example, if it was a standard A lamp, you could use any LED lamp that consumes up to 40 watts with no safety issue.
What replaces a 40 watt bulb?
Here’s a cheat sheet for equivalents: To replace a 40-watt incandescent lamp bulb, look for at least 450 lumens; 60 watts, get 800 lumens or higher; 75 watts, get a minimum of 1,100 lumens; 100 watts, get 1,600 lumens and up. Kelvins: The color of the light is measured by its temperature in kelvins (K).
What is the difference between BR40 and PAR38?
PAR38 will fit – the number denotes eighths of inches wide, so PAR38= 38/8″ width, or 4 3/4″w. A BR40 is 40/8″ inch wide, or 5″ wide. About the same size and will fit in the same fixtures.
What are the different types of RPG 7v2 ammo?
Current production ammunition for the RPG-7V2 consists of four main types: PG-7VL [c.1977] Improved 93 mm HEAT warhead effective against most vehicles and fortified targets. PG-7VR [c.1988] Dual 64 mm/105 mm HEAT warhead for defeating modern armored vehicles equipped with reactive armor blocks.
What is the penetration range of the RPG-7V2?
Armor penetration is warhead dependent and ranges from 30 to 60 centimetres of RHA; one warhead, the PG-7VR, is a ‘tandem charge’ device, used to defeat reactive armor with a single shot. Current production ammunition for the RPG-7V2 consists of four main types:
What kind of barrel does an RPG 7 have?
The RPG-7 has a large expansion chamber in its 40mm barrel, and approximately the rear half of the barrel covered by a wooden sheath extending from the rear grip to the cone-shaped blast deflector. Newer models have phenolic-impregnated5 laminated wooden shields and the Chinese use phenolic shields.
What optical sight does the RPG-7 use?
The RPG-7 uses the PGO-7 optical sight, which is attached to the left side of the launcher between the two handgrips. The sight weighs 0.5kg and is a 2.7× reflex sight with a 13-degree field of vision. Yellow and green lens filters are provided to adapt it to different lighting and haze conditions.