What are FloodSafe hoses?
The FloodSafe’s patented design protects against catastrophic water damage caused by burst, broken or ruptured water supply hoses and fittings. FloodSafe™ connectors include a standard braided stainless steel flexible hose and a FloodSafe™ shutoff device located on the inlet.
How do FloodSafe hoses work?
FloodSafe™ is actuated by flow of cold or hot water in excess of the design flow rate indicated on the label. Once a downstream flow of water in excess of the flow required by any standard fixture/appliance is detected, FloodSafe™ assumes a burst and the flow of water is shutoff.
How does a flood Defender work?
The Flood Defender by Eastman is a 10-foot universal ice maker connector with a 1/4-inch inlet that prevents potential damages caused by ice maker leaks. It is designed with a built-in auto-shut-off valve that activates when excess water flow is detected, protecting your floors and surrounding fixtures.
Where does washer drain to?
Washing machines drain into what is called a standpipe. A standpipe is a vertical piece of pipe with an elbow on the bottom. The elbow remains filled with water, preventing sewer gas from backing up into your laundry area.
Are dishwasher drain hoses Universal?
Application – DWDH78 drain hose can be used on most brands of dishwashers. Cutting hose at barb allows the hose to adapt to the newer Whirlpool/Kenmore machines. Purpose – This universal dishwasher drain hose can be used to connect many brands of dishwashers to the drain.
What is an aquastop hose?
The Water Safety System or ‘Aqua Stop Valve’ has been invented for leakage prevention. It is attached to the water supply hose and automatically cuts off water flow when hose gets damaged.
Is it OK to drain washing machine outside?
Actually, it is foolish to discharge washing machine water into your septic system, considering the wear and tear it will subject your system to as the single largest depositor to it. Just plumb it outside and use a biodegradable laundry detergent.
How far down should a washer drain hose go?
In order for the drain hose on your Top Load washer to function properly, the drain must be at least 30″ up from the floor and less than 8 feet high. In order for the drain hose on your Front Load washer to function properly, the drain must be at least 24″ up from the floor and less than 8 feet high.
Are all dishwasher drain hoses the same?
Hose Sizing Most dishwasher drain hoses are 1/2 inch in size. To allow for different types of connections at the end of the hose, dishwasher drain hoses are fitted with a special rubber boot. This allows them to connect to 1/2-inch, 3/4-inch and 1-inch connections.