Does Farmall Cub have PTO?
Three major series of the original Cub were built: the Farmall Cub until 1964 (sn 224703), the International Cub until 1975 (sn 248124), and the new International Cub until the end of production in 1979….Farmall Cub.
| Power Take-off (PTO) | |
|---|---|
| Rear PTO: | independent |
| Rear RPM: | 1600, 1800 (counter-clockwise) |
Does a Farmall A have a PTO?
The Farmall A and B were nearly identical tractors. The A featured an offset engine and wide front end….Farmall A.
| Power Take-off (PTO) | |
|---|---|
| Rear PTO: | transmission |
| Rear RPM: | 540 (1.125) |
How many horse power is a Farmall Cub?
To me, the most versatile, useful, practical farm machine ever made was the Farmall Cub. Introduced in 1947 to replace horses and mules on small farms, about 245,000 Cubs were produced from 1947 until 1979. The tractor featured a 4-cylinder, 9.25 horsepower gasoline engine, gradually increased to about 15 horsepower.
Why is a Farmall Cub offset?
The market of this little tractor was the small-acreage farmer, and it was designed by Farmall engineers in the years following World War II to replace a horse or mule for farming purposes. The tractor was offset to the left, while the driver’s seat and steering wheel were on the right.
How do I find out what year my Farmall tractor is?
First and foremost is the tractor serial number, which is stamped into an aluminum plate located on the right side of your tractor, on the steering gear housing. Use the tractor serial number table to look up the year.
How fast does a Farmall A go?
Farmall Super A
| Belt Pulley | |
|---|---|
| Diameter: | 8.5 inches 21 cm |
| Width: | 6 inches 15 cm |
| RPM: | 1157 |
| Speed: | 2574 ft/min 784.56 meters/min |
What engine is in a Farmall Cub?
Farmall Cub Engine
| Engine Detail | |
|---|---|
| International Harvester C60 | |
| liquid-cooled | |
| Displacement: | 59.5 ci 1.0 L |
| Bore/Stroke: | 2.625×2.75 inches 67 x 70 mm |
Are Farmall tractors still made?
Overall, the Farmall ‘letter’ series, well built and affordable, became not only a defining product line in IH history, but an iconic symbol of the prototypical American small-farm tractor. Many machines (especially the two largest models, the H and M) are still in operation on farms today.
How much does a Farmall Cub tractor weigh?
Farmall Cub Dimensions
| Farmall Cub Weight | |
|---|---|
| Operating: | 1477 lbs 669 kg (early) |
| 1877 lbs 851 kg (late) | |
| Ballasted: | 2891 lbs 1311 kg |
How can you tell how old a tractor is?
When you want to identify the year of your tractor, you can look at several things. First and foremost is the tractor serial number, which is stamped into an aluminum plate located on the right side of your tractor, on the steering gear housing. Use the tractor serial number table to look up the year.
What years were Farmall A made?
The Farmall A was built by International Harvester from 1939 to 1947 in Chicago, Illinois, USA and Louisville, Kentucky, USA.