How big should my above-ground pool deck be?
A good rule of thumb is for a deck’s square footage to be at least the same as your pool’s square footage. To illustrate with a simple example, say a rectangle pool is 15 feet wide by 30 feet long. With a 450-square-foot pool, the deck should also be at least 450 square feet.
How do you build a platform deck for an above-ground pool?
Starts here32:0395 – How to Build a Backyard Deck – Around an Above Ground Pool DIY …YouTubeStart of suggested clipEnd of suggested clip61 second suggested clipAnd this is going to kind of define the outer perimeter of the deck. So we’re gonna run a stringMoreAnd this is going to kind of define the outer perimeter of the deck. So we’re gonna run a string line along that outer edge to show the outer point of the deck.
Should pool deck be above or below top rail?
The water level for an above ground swimming pool is about six inches below the top rail. Adding a deck over the top rail can now make the water level more than eight inches below the deck. This may be OK for you, but you also may not like being too far from the water.
Can you put Trex around a pool?
A beautiful deck is a perfect complement to a relaxing backyard oasis. Offset the in-ground or above-ground pool of your dreams with spectacular decking options from Trex.
How big should the gap be between a pool and a deck?
The maximum gap between the decking and the pool coping is generally 3/4 inch. Slip resistance, gaps between boards and slope of the deck may also be regulated depending on the local codes. These design requirements should also be considered for any deck adjacent swimming pools or hot tubs, whether in or above ground.
How high should a pool deck be?
Building a separate area of your deck either lower or higher than around your pool will separate your spaces and give a more luxurious feel. The height of an above-ground swimming pool is usually around 52 to 54 inches.
How much does a 400 sq ft deck cost?
Cost To Build A Deck By Size
|Deck Size||Square Feet||Average Cost|
|12×20||240||$3,600 – $8,400|
|14×20||280||$4,200 – $9,800|
|16×16||256||$3,840 – $8,960|
|20×20||400||$6,000 – $14,000|
What material is best for above ground pool?
A steel pool is by far the strongest. While rust has been a problem in the past, newer steel pools have a hot-dipped galvanized coat that resists rust and come with vinyl coatings. Aluminum pools have become popular over the last 10 to 15 years because of their ability to handle inclement weather.