How do I add an email address to my Konica Minolta bizhub 363?

How do I add an email address to my Konica Minolta bizhub 363?

How to add a user to the Konica Minolta address book

1. Log in to copier or tap your ID card.
2. Tap Utility.
3. Select [1 One-Touch/user Box Registration]
4. Select [1 Create One-Touch Destination]
5. Select [1 Address Book (Public)]
6. Select [1 Email]
7. Select New.
8. Enter Name (how you want it to appear on the one touch)

How do I change the scan settings on my Konica Minolta?

Press User Settings, then Scan/Fax Settings, then Default Scan/Fax Settings. If Current Setting is selected, change selection to Default Setting, then press OK. Select Default Scan/Fax Settings, then change selection back to Current Settings, and press OK.

How do I scan from Konica Minolta to email?

Scan to Email From this menu, select the “Direct Input” option for your scan destination options. These include scan-to-fax, scan-to-PC and scan-to-email. Choose scan-to-email. An address book of available email addresses should be displayed on this screen if they have been programmed onto your Konica Minolta MFP.

How do I set up SMB scanning?

Setup SMB Scanning to a Windows 10 PC

1. Access the Control Panel as the System Administrator.
2. Configure the Network Address Manually at the Device Control Panel Touch Screen.
3. Print a Configuration Report From the Control Panel.
4. Create a New User for Use with SMB Scanning.

How do I troubleshoot a scan to email?

Step two: Check for problems with sending e-mail

1. Using the top navigation tabs, click Scan/Digital Send.
2. In the left navigation pane, click E-mail Setup.
3. Make sure the Enable Send to E-mail check box is checked on the Scan/Digital Send tab on the E-mail Setup page.
4. Check the SMTP server settings to identify the problem.

How do I scan from copier to email?

How to Scan Documents on a Copier to Send to a Computer or Email

1. Turn on the copier and your computer.
2. Lay the document on the copier with the printed side down on the glass.
3. Press the “Scan” button to begin the scanning process.
4. Confirm the scanned image is accurate.
5. Select a destination for your document.

How do I change my scan settings?

How to Change Scanner Settings

1. Choose Start→Control Panel.
2. Click View Scanners and Cameras.
3. Click any scanner in the Scanners and Cameras area and then click the Scan Profiles button.
4. Select a scanner and click Edit.
5. Review the settings.

What is SMB scanning?

Overview. This function sends the scanned file to a folder that is shared out on the network. SMB stands for Server Message Block and is a protocol used for file and printer sharing by all major operating systems today.