How do I configure my router for inter VLAN routing?
This method of inter-VLAN routing relies on a router with multiple physical interfaces. Each interface is usually connected to the switch, one for each VLAN….Step 3: Configure the IP addresses on the router.
| Description | Command |
|---|---|
| Configure IP address and subnet mask | Router(config-if)# ip address 192.168.20.1 255.255.255.0 |
Why do we configure Inter VLAN routing?
Definition. Inter-VLAN routing can be defined as a way to forward traffic between different VLAN by implementing a router in the network. The user nodes in the VLANs forwards traffic to the router which then forwards the traffic to the destination network regardless of the VLAN configured on the switch.
What is an inter VLAN routing?
Inter-VLAN routing is the process of forwarding network traffic from one VLAN to another VLAN. There are three inter-VLAN routing options: Router-on-a-Stick: This is an acceptable solution for a small- to medium-sized network.
How do you communicate between two VLANs?
VLANs don’t communicate, hosts attached to VLANs do. The answer would be the same for hosts in different switches not using VLANs: they can communicate through a router as long as they are in different IP network (subnet), since they are in different broadcast domains.
What is difference between VLAN or inter-VLAN routing?
What is Inter-VLAN routing? Virtual LANs ( VLANS ) are networks segments on a switched LAN. Inter-VLAN routing refers to the movement of packets across the network between hosts in different network segments.
What is difference between VLAN or inter VLAN routing?
VLAN are used to segment your network eliminate broadcast it is also used for security purpose. VLAN of sales department cannot access VLAN of finance department. InterVLANs are used to create VLAN to VLANs.
What is the difference between VLAN and inter-VLAN?
Virtual LANs ( VLANS ) are networks segments on a switched LAN. Inter-VLAN routing refers to the movement of packets across the network between hosts in different network segments. VLANs act as separate subnet on the network.
How do I configure two VLANs on one port?
If you want TWO VLANs to be accessible on that port, you can configure it as a trunk and assign both VLANs to the port and the downstream device will need to be able to make use of VLAN tagging. Additionally, you can set the “native” VLAN on the port so that it will also still accept untagged traffic.