How do I connect my Yamaha RX-V475 to my network?

How do I connect my Yamaha RX-V475 to my network?

You will need to have the receiver connected via HDMI Out to your TV’s HDMI input.

1. Press the Setup button on the remote control.
2. Press the Arrow Down button repeatedly on the remote control to Network.
3. Press the Enter button on the remote.
4. Press the Arrow Down button repeatedly on the remote control to Information.

Does Yamaha RX-V475 have Bluetooth?

There is a handy front-panel minijack input, which is unique among receivers at this price. Like every other receiver at this price, the RX-V475 lacks both Bluetooth and Wi-Fi.

How do I update my Yamaha RX-V475?

On the remote control, press the SETUP button. Select “Network” > “Network Update”. Your current firmware version is displayed on TV. If your firmware version is 1.34 or higher, the AV receiver is already up-to-date.

How do I reset my RX-V475?

RX-V475 Factory Reset

1. Set the unit to Standby Mode using the Power button. (Upper left corner.)
2. While holding down Straight button, hit the Power button.
3. Use the Program Selector buttons to navigate to INIT CANCEL.
4. When the proper selection is made, turn off the unit using the Power button.

How do I update my Yamaha receiver via USB?

Here’s how to do it:

1. Visit the AV receiver page on the Yamaha website.
2. Once you’re on the product page for your specific receiver, click on the Downloads tab.
3. Connect a standard USB thumb drive to your computer and download the firmware to it – a process that usually takes just minutes.
4. Power off your receiver.

Why does my Yamaha receiver have no sound?

Check the setting of HDMI Control on the TV. Please check the setting of the synchronized operations is “ON” and the TV is set to output audio from the external speakers. Connect the AV Receiver/Sound Bar and TV with an OPTICAL cable instead of an HDMI cable. If the sound comes normally, please change other HDMI cable.

Is there a reset button on my Yamaha receiver?

The reset procedure can only be done on the front panel of the receiver only. Set the unit to stand-by first by turning it off. While holding down the Straight button, press the Power button. Now the receiver has reset.