How do I reset my Brother HL 2030?

How do I reset my Brother HL 2030?

Brother HL-2030 – Reset Drum Simply open the front cover, and hold the “GO” button until all four LED’s are lit. Release the “GO” button and close the front cover.

How do you change the ink cartridge in a Brother HL 5470DW printer?

How to change Brother HL-5470DW toner cartridges on printer?

1. Turn the printer on.
2. Get access to the toner cartridge by opening the front cover.
3. Pull the drum and toner assembly out of the machine.
4. Unlock the assembly by pushing down the green lock lever.

How do you reset the toner on a Brother HL l2310d?

Complete the following steps to reset the toner counter.

1. Press and Hold the Power button until the machine turns off.
2. Open the Toner Door.
3. Press and Hold the Go button until step 5.
4. Press the Power button.
5. Release the Go button when the Toner, Paper, and Drum lights are lit.
6. Press the Go button 9 times.

Why is the drum light flashing on my Brother printer?

The Drum LED flashes if the drum unit is near the end of its life. Use the drum unit until you have a print quality problem, then replace the drum unit with a new one. The Drum LED continues to flash if the drum counter was not reset when you installed a new drum unit.

How do you reset the drum on a Brother HL 2130?

How to reset the drum counter:

1. Make sure the machine is on, then open the front cover.
2. Press and hold the “Go” button for about 4 seconds or until all the LEDs light up.
3. Release the “Go” button and close the front cover.
4. If the drum light is off, the drum unit is reset.

Where is the Brother printer driver on Mac?

Click on the Print & Fax, Print & Scan or Printers & Scanners icon. Click on + button. Click on Default. Choose your Brother machine from Printer Name list.