How do I reset my canon mx922 printer?

How do I reset my canon mx922 printer?

Solution

1. With the printer powered on, press the Menu button.
2. Use the arrows to select Setup, then press the OK button.
3. Use the arrows to select Device settings, then press the OK button.
4. Use the arrows to select Reset setting, then press the OK button.
5. Select what you want to reset, then press the OK button.

How do you clear a Canon error code?

If the above solutions don’t help, you can reset the printer as follows:

1. Switch on the printer.
2. Press and hold the Stop/reset button.
3. Press the button that you use to make a color copy and hold it down.
4. Wait 5 seconds.
5. The printer now reboots and sets itself up.

How do I fix the code 1300 on my Canon printer?

Support Code=1300 The paper may be jammed in the paper output slot. Remove the jammed paper, reload paper properly in the machine, then tap OK on the touch screen.

Why is my Canon mx922 not responding?

There can be multiple reasons for your Canon mx922 printer not responding. But the most common reason behind this issue is the lack of communication between the printer and your computer. It is also possible that you are using some outdated printer driver. This can easily be resolved by just updating all the drivers.

How do I reset my Canon printer after paper jam?

Remove the paper following the procedure below.

1. Turn off the printer, and unplug the power cord of the printer from the power supply.
2. Remove the Cassette.
3. Set the printer upright with the left side down.
4. Slowly pull the jammed paper out so that the paper does not tear.
5. Align the paper, then reload it in the Cassette.

How do I fix error code 1003?

Make sure your Android device is up to date

1. Go to Settings.
2. Select System, then select Advanced. If you don’t see System, select About Device/Tablet.
3. Select System Update or Software Update.
4. Once you’ve downloaded any available updates, try Netflix again.

How do you fix Canon printer not responding?

Fixes to try

1. Do some basic troubleshooting.
2. Run the printer troubleshooter.
3. Restart the Print Spooler service.
4. Configure the correct printer port for your printer.
5. Update your printer driver.

How do I contact Canon support for upgrade options?

Please contact our Sales group to inquire about your upgrade options at 866-443-8002. To verify your support options please create or log into your Canon Account. Was this article helpful?

What is the difference between a 1312 and a 1313?

1304 – Paper is jammed when automatic duplex printing. 1311 – Paper loaded in the cassette (upper) is jammed. 1312 – Paper loaded in the cassette (lower) is jammed. 1313 – Paper is jammed as the machine pulled in the printed paper.

How do I upgrade my Canon camera outside of warranty?

Out of Warranty – If you are outside of your warranty period, you do qualify for a replacement through the Canon Upgrade Program. Please contact our Sales group to inquire about your upgrade options at 866-443-8002. To verify your support options please create or log into your Canon Account.