How do I reset my Hayward pool light?
To re-synchronize your lights, turn the switch on, then back off, then wait between 11 and 14 seconds and turn the switch back on. When the lights come back on, they should enter program #1, and be synchronized.
Why is my LED pool light not working?
If the breaker that your pool light is on has been tripped, unplug whatever you just turned on or plugged in and then reset the breaker by turning it all the way off and then back on again. If you have any GFCI outlets on your pool light circuit, try resetting them. If that doesn’t work, you may need to replace it.
How long do Hayward ColorLogic lights last?
50,000 hours
The life expectancy for a Colorlogic light is 50,000 hours. The light will perform for over 10,000 hours without any noticeable loss of brightness.
How do I get my pool light to change colors?
Flipping the switch initially turns your light on. Turning the switch off then on again will set the light to the second color. Repeating this procedure allows you to cycle through the various colors and light shows easily. Keep turning the switch off then on again until you have reached your desired setting.
Why is my pool light not bright?
Loose Fixture – A very common cause of dimming pool lights is simply wobbly housing. Exposure to chlorine and other pool chemicals can erode the seal and water can enter the housing, causing the light to short out. When water enters the housing, your breaker or GFCI may trip.
Can you replace the bulb in a Hayward ColorLogic pool light?
ColorLogic® 120V LED Replacement Bulbs are a quick, cost-effective way to upgrade standard incandescent pool lights to vibrant, color-rich, energy-efficient LEDs. Installation does not require rewiring or fixture replacements.
How long do Hayward LED pool lights Last?
Most incandescent bulbs will burn for 1,000 hours before bulb replacement is necessary. LED bulbs can burn for 25 years or more (or so they tell us).
What are the problems faced while using Hayward colorlogic pool lights?
This is usually caused by a voltage spike and it is advised that you call an electrician to examine your lines before installation. These are some problems faced while using the Hayward ColorLogic pool lights and you can be assured as they are nothing to worry about.
What is the difference between the Hayward colorlogic versions?
Although the ColorLogic 4.0 version is 50% brighter than the ColorLogic 2.5, unfortunately, due to the timing of shows and sequencing of lights, they are not compatible with ColorLogic Gen 2.5 lights. The flexibility in programming is the best feature of the Hayward ColorLogic 4.0.
What is the difference between the colorlogic and other pool lights?
The LEDs in the ColorLogic can save pool owners up to 79% on energy costs when compared to traditional pool lighting. Unfortunately, the ColorLogic 4.0 is only available in color. If you prefer white lights over colored light, Hayward offers the CrystaLogic White LED light. The ColorLogic 4.0 light emits 5 fixed colors and 7 different light shows.
What are the downsides of the colorlogic light controller?
One of the downsides to the ColorLogic 4.0 is that it does not sync with older models. In order for the light colors or light shows to sync, they must all be the 4.0 version. Still, pool owners also have the option of purchasing the ColorLogic Light Controller.