How do I reset my Maytag oven control panel?

How do I reset my Maytag oven control panel?

Make sure the Control Lock function is turned OFF. Some ovens may be equipped with Control Lock. Look for “Control Lock” on the oven control console, then reset by, typically, pushing & holding for 3 seconds.

How do I reset my Maytag oven?

Reset power to the product:

1. Power unit down by turning off the circuit breaker(s) for one (1) minute.
2. Power unit up by turning on the circuit breaker(s).
3. Start a bake cycle.
4. Monitor the oven for one (1) minute to ensure the error code does not display again.
5. Verify oven operation.

Which error code indicates the oven temperature sensor is open or shorted?

Error Code F2/F4 – Temp Sensor Short-Circuited An F2 error can mean that the oven’s temperature sensor is malfunctioning or short-circuited. What is this? This means that it will no longer work properly and you will need a technician to check the oven for you. The part might need to be replaced or repaired.

What does the code F3 mean on a Maytag oven?

temperature sensor
Both the Maytag oven F3 error code and F4 code indicate there is an issue with the temperature sensor so the cook mode on your oven will stop. Check the sensor to make sure it is closed and there are not issues with the wiring or connection first. If the temperature sensor is damaged or not working, replace it.

What does F4 mean on an oven?

oven sensor needs to be replaced
F4. This code usually means that the oven sensor needs to be replaced. F5. This code usually means that the electronic control needs to be replaced.

What causes oven control panel not working?

Possible causes are a tripped house circuit breaker for the range, a problem with the outlet cord (not plugged in or broken) or an internal wiring failure. A blown thermal fuse can prevent the control from powering up on some ranges.

What do the error codes on my Maytag oven mean?

As with other Maytag oven error codes, the following codes indicate problems with the touchpads, ERC, or temperature sensor. If you are not comfortable fixing these problems on your own, be sure to contact a qualified Maytag repair specialist near you.

What does F2 mean on a Maytag oven?

The F2 code means your Maytag oven temperature is too hot when you set it on bake, broil, or clean. If you see this error, you will have to replace the relay board or oven temperature sensor.

How do I fix the F1 error on my Maytag oven?

To fix the error, try pressing the key to unstick it. If it continues to be an ongoing issue, you will have to replace the touch pad or touch pad/control board if they are one assembled unit. The Maytag oven F1 error code indicates the touchpad or control board (clock) on your oven is faulty.

What does ERC mean on a Maytag oven?

The door switch activates the door lock motor to prevent the oven door from being opened during the cleaning cycle. ERC (Electronic Range Control) codes require immediate repair. As with other Maytag oven error codes, the following codes indicate problems with the touchpads, ERC, or temperature sensor.