How do I reset my Weiser Electronic Deadbolt?

How do I reset my Weiser Electronic Deadbolt?

A factory reset will delete all codes associated with the lock. 3 Press the Program button once more. In 20 seconds, when the LED flashes green and you hear one beep, the lock has been reset. 4 Perform the door handing process again to teach the lock the orientation of the door and add user codes to your lock.

How do I change the master code on my Weiser lock?

How do I change the mastercode on my Powerbolt 2?

1. Make sure the lock is unlocked and the door is open.
2. Enter your Mastercode – for new install, default is 0-0-0-0.
3. Press the lock button. You will hear one beep.
4. Press 7.
5. Press the lock button. You will hear one beep.
6. Enter a new Mastercode.
7. Press the lock button.

What is the master code for Weiser locks?

0-0-0-0
The lock is programmed with the default mastercode 0-0-0-0. Replace this with a code of your own. The mastercode must be 4-10 digits. Keep door open and unlocked during programming.

How do I reset my electronic door lock?

How do I reset a code on my Powerbolt?

1. Insert functioning key & turn 1/4 turn clockwise.
2. Insert & remove the SmartKey learn tool. Remove functioning key.
3. Insert new key & turn 1/2 turn counter-clockwise. Done. Your lock is now re-keyed! “”

How do I remove the code from my Weiser Smart Lock?

Deleting User Codes

1. Press the program button.
2. Press the lock button.
3. Enter user code to delete.
4. Press lock button.
5. Re-enter user code to delete.
6. Press lock button.
7. If successful, the keypad will flash green once and you will hear 1 beep (if switch #3 is on).

How do you set up a Weiser Powerbolt?

How to add a one-time User Code

1. Make sure the lock is unlocked and the door is open.
2. Enter your existing Mastercode.
3. Press. You will hear one beep.
4. Press 1 – 9.
5. Press. You will hear one beep.
6. Enter a new User Code. It must be 4-10 digits.
7. Press. You will hear two beeps if successful.

How do you change the code on a defiant electronic deadbolt?

So here’s how to do that:

1. Press and hold the SET button until you hear a beep before releasing it.
2. Enter your current Master Code and press the Lock button.
3. Press 2, 0, and then press the Lock button.
4. Now enter a new User Code (4-6 digits) and then press the Lock button.
5. That’s all about adding a new User Code.

How do I get rid of the Weiser master code?

What is an electronic deadbolt and how does it work?

Electronic deadbolts let you say goodbye to keys and enjoy a simpler way to access your home. Just punch in your entry code. With customizable entry codes you can provide temporary access to contractors, babysitters and disable them with ease.

How do I contact Weiser Lock customer service?

If the latch bolt does not extend to lock, then all codes have been successfully deleted. 6 / 15 62810 / 01 USA: 1-800-677-5625 Canada: 1-800-501-9471 www.weiserlock.com ©2015 Spectrum Brands, Inc. 1.

How long does it take to re-key a two cylinder deadbolt?

With the first and only two-cylinder Key Control Deadbolt, either cylinder can be re-keyed in seconds, without removing the lock from the door. Are you a landlord or property manager?