How do I setup my Fox 36?
Starts here20:18How To Set Up A Fox Suspension Mountain Bike Fork – YouTubeYouTubeStart of suggested clipEnd of suggested clip56 second suggested clipSo this one says ride away air pressure and rebound. Now i’m about 89 kilograms. Okay so on this foxMoreSo this one says ride away air pressure and rebound. Now i’m about 89 kilograms. Okay so on this fox 36 that means with a high speed rebound. I’m going to be running three clicks.
What is suspension bracketing?
Bracketing. Bracketing is a style of tuning that is for a more precise result. This is for an advanced rider looking to tune their products perfectly. It can be easy to get lost in your settings so our recommendation is to work with one adjustment feature at a time.
Can you increase the travel on a Fox 36?
Supplies Needed. 2018 36mm FLOAT forks can be travel adjusted by replacing the air shaft assembly. 36mm FLOAT NA2 forks can be reduced in travel as low as 100mm (831 air shaft). 36mm Speed-Ped-Elec and 831 forks can only be extended to have up to 160mm maximum travel.
How much air should I put in my Fox 36?
Generally, sag should be set to 15 – 25% of total fork travel….Setting Sag.
| 36 float AIR SPRING SETTING guidelines | |
|---|---|
| Rider Weight | Air Pressure |
| 170 – 185 lbs. | 62 psi |
| 185 – 200 lbs. | 69 psi |
| 200 – 215 lbs. | 76 psi |
How do you set a rebound Fox 36?
Adjusting Rebound Use your air pressure to find your rebound setting. Turn your rebound knob to the closed position (full clockwise) until it stops. Then back it out (counter-clockwise) to the number of clicks shown in the table below. Adjust rebound until when tested, the fork returns quickly but does not top out.
How do you adjust a mountain bike suspension?
Starts here12:27How To Set Your Suspension Up In 10 Minutes | MTB – YouTubeYouTube
Do I need volume spacers?
In a few words, if you’re bottoming out frequently, but your sag is correctly set, add a volume spacer to reduce air chamber volume and increase the rate of progression in your suspension. Reducing volume makes your suspension firmer sooner in the travel, increasing the spring rate in the mid and end-stroke.
Can you reduce Fox fork travel?
32mm forks can be reduced in travel as low as 80mm. Certain 32mm forks may have travel extended only if they were built with a damper and chassis that can be extended safely to the new longer travel.
What PSI is Fox 36?
36 TALAS maximum air pressure is 200 psi. The recommended settings in this tuning guide are designed to be a starting point, in order to get you out on your first ride in as few steps as possible.
What pressure should my Fox forks be?
Sag should be set to 15 – 20% of total fork travel
| Suggested Starting Points for Setting Sag | ||
|---|---|---|
| Rider Weight (lbs) | Rider Weight (kgs) | 34 FLOAT Pressure (psi/ bar) |
| 120-130 | 54-59 | 58psi/ 4.0 bar |
| 130-140 | 59-64 | 63psi/ 4.3 bar |
| 140-150 | 64-68 | 68psi/ 4.7 bar |