How do I setup my HP ProCurve 2810?

How do I setup my HP ProCurve 2810?

Installing the switch

1. Verify components shipped with the ProCurve 2810 Switch.
2. Prepare the installation site.
3. Verify that the switch passes self-test.
4. Mount the switch and route the power cords.
5. Connect power to the switch.
6. Connect the network cables.
7. (Optional) Connect a management console to the switch.

How do I restore my HP ProCurve 2810 to factory settings?

To execute the factory default reset on the switch, perform these steps:

1. Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch.
2. Continue to press the Clear button while releasing the Reset button.
3. When the Self Test LED begins to blink, release the Clear button.

How do I setup my HP ProCurve Switch?

Installing the switch

1. Verify components shipped with the ProCurve 2520 Switch.
2. Prepare the installation site.
3. Verify that the switch passes self-test.
4. Mount the switch and route the power cords.
5. Connect power to the switch.
6. Connect the network cables.
7. (Optional) Install mini-GBICs.

How do I manage my HP Procurve switches?

How to: Configure a HP ProCurve switch

1. Step 1: Connect your serial connection.
2. Step 2: Conenct PuTTY.
3. Step 3: Get the IP address.
4. Step 4: Set time server.
5. Step 5: Set SNMP community info.
6. Step 6: Launch the web GUI.
7. Step 7: Configure basic info.
8. Step 8: Create VLANs.

How do I access the HP ProCurve switch?

To connect a console to the switch, use the console cable shipped with the switch and connect a PC or VT-100 terminal to the console serial port. The PC or terminal then functions as a management console connected directly to the switch.

What is the default username and password for HP ProCurve switch?

The default username for first time configuration is admin, no password is required. Usernames and passwords are case sensitive. To log in to the CLI: 1. Press Enter.

What is the default password for HP switch?

The default username for first time configuration is admin, no password is required. Usernames and passwords are case sensitive.

What is the difference between the ProCurve switch 2810 and 2810-48g?

The ProCurve Series 2810 Switches (Switch 2810-24G (J9021A) and Switch 2810-48G (J9022A)) are store-and-forward, multiport Gigabit switches offering low latency for high-speed networking. Switch Ports A Switch 2810-24G has 20 and a Switch 2810-48G has 44 auto-sensing 10/100/ 1000Base-T RJ-45 ports. RJ-45 ports are IEEE 802.3ab Auto MDI/MDI-X.

How do I connect a series 2810 switch to a PC?

By default, the RJ-45 connectors are enabled. Series 2810 switches use the console port to connect to a PC or workstation running a VT-100 terminal emulator, or a VT-100 terminal. A cable to connect the switch to the console device is supplied. Series 2810 switches do not have a power switch.

How many RJ-45 ports does the 2810-24g have?

A Switch 2810-24G has 20 and a Switch 2810-48G has 44 auto-sensing 10/100/ 1000Base-T RJ-45 ports. RJ-45 ports are IEEE 802.3ab Auto MDI/MDI-X. Both switches have four dual-personality ports—either auto-sensing 10/100/ 1000Base-T RJ-45 or mini-GBIC.

What are the advantages of using ProCurve Manager?

Selecting a Management Interface Advantages of Using ProCurve Manager or ProCurve Manager Plus • Device Software Updates: This feature automatically obtains new device software images from ProCurve and updates devices, allowing users to download the latest version or choose the desired version.