How do I update firmware on AP9631?

How do I update firmware on AP9631?

More videos on YouTube

1. Select the “UPS Network Management Card 2” link.
2. Scroll down to the product documentation tabs.
3. Click the Software and Firmware tab.
4. Find the firmware file.
5. Verify that you have located firmware appropriate for the host UPS family.
6. Click the “Download” Link.
7. Then Select the “Download Now” button.

How do I update my NMC firmware?

NMC1 – Log into the Web UI and navigate to Administration -> General -> About. The updated firmware should be listed on this page. Alternatively, verify via Telnet, SSH, or local console connection on the main page after log in.

How do I update my APC UPS firmware?

Starts here3:26Upgrading Firmware on APC Smart-UPS SMT & SMX UPS viaYouTubeStart of suggested clipEnd of suggested clip30 second suggested clipStep 4 is to go to the configuration menu. Then go to firmware update. And then use the choose fileMoreStep 4 is to go to the configuration menu. Then go to firmware update. And then use the choose file button to navigate to the firmware image you downloaded in step.

How do I update PDU firmware?

Update the PDU Metering Unit Firmware (Original PDU)

1. Locate and download the latest version of the firmware.
2. Save the downloaded firmware ZIP file to a directory accessible to the PDU over the network.
3. Use the unzip command to extract the metering unit firmware from the downloaded ZIP file.

How do I update firmware on APC Network Management Card?

APC UPS – Upgrading the Firmware

1. Access the APC website support area and download the lastest version of firmware to your Network Management Interface.
2. Extract and start the firmware upgrade utility.
3. Enter the IP address of your UPS, enter the APC username and it’s password.

How do I update SRT firmware?

There are two methods to update the firmware of the UPS:

1. Locally via a Serial or USB connection using the Firmware Upgrade Wizard application.
2. Remotely via the Network Management Card.
3. The Firmware Upgrade Wizard is the most reliable and preferred method of upgrading.

How do I update my DDJ 1000 firmware?

1. Connect your DDJ-1000 to your computer using a USB cable.
2. Launch the Driver Version Display Utility or Settings Utility.
3. Check the Firmware Version in the Settings Utility.
4. Unzip the downloaded file.
5. Check the unzipped file.
6. Connect the DDJ-1000 to your computer.
7. Turn on the power of the DDJ-1000.
8. Updating procedures.

How do I reset my network management card for UPS?

Press and hold the NMC’s pinhole reset button for 20+ seconds, ensuring the NMC’s status LED is pulsing green during this time. When it changes to amber or orange, release the reset button to let the format function complete and for the NMC to complete its reboot process.

How do I configure APC Network Management Card network settings?

Connect to the UPS/device serial port using the correct APC configuration cable….9600 bps, 8 data bits, no parity, 1 stop bit, and no flow control.

1. Apply the port settings to establish the connection.
2. Press 3-5 times to display the username prompt. *
3. Use the default username and password of “apc”.

How do I upgrade the firmware on my apnmc2 AP9630?

NMC2 AP9630, AP9631, and AP9635 Remote Firmware Upgrade Go to https://www.apc.com/tools/download/ and search for your network management card model number. Select the “UPS Network Management Card 2” link. Scroll down to the product documentation tabs. Click the Software and Firmware tab. Find the firmware file.

What is the latest firmware for the Smart-UPS network management card (AP9630)?

UPS Network Management Card v6.9.6 Firmware for Smart-UPS & Galaxy 3500 with AP9630/31/35 Firmware Upgrades for all supported APC offers, bringing the latest supported features to end users.

What is an APC firmware upgrade?

Firmware Upgrades for all supported APC offers, bringing the latest supported features to end users. Firmware Upgrades for all supported APC offers, bringing the latest supported features to end users.