How do you flatten a curved surface in Inventor?

How do you flatten a curved surface in Inventor?

Use “Edit – Unwrap” to flatten the surfaces. Export the flattened surfaces to a new STL file….Create part from the surface:

1. Use the “Thicken/ Offset” command to create a new surface (this also works with a thickness of 0).
2. Save part.
3. Open new part and import surface from point 1 by Derived feature.
4. Use “Unwrap” feature.

How do you extrude 3D sketches?

Extruding Surfaces from a 2D or 3D Face

1. Click Insert > Surface > Extrude.
2. Select a face:
3. Select other faces to define the extrude as required.
4. Select the end condition.
5. For 3D faces, select a plane, edge, 2D face, or sketch line to define the direction of extrusion .

How do you project a curved surface?

Correcting Image Shape with Curved Surface

1. Turn on the projector and display an image.
2. Press the Menu button.
3. Select the Settings menu and press Enter.
4. Select the Geometric Correction setting and press Enter.
5. Select the Curved Surface setting and press Enter.
6. Select the Correct Shape setting and press Enter.

How do you unfold a part in Inventor?

To Unfold Sheet Metal Features

1. On the ribbon, click Sheet Metal tab Modify panel Unfold .
2. Do one of the following:
3. Select highlighted bends or rolls to unfold.
4. Preview the flattened state, and add or delete bends or rolls to obtain the desired flat.
5. Click the Sketches arrow, and select any unconsumed sketches to unfold.

How do you unwrap in Inventor?

Unwrap part faces

1. On the ribbon in a part file 3D Model tab Create panel Unwrap.
2. Click the Advanced Settings Menu and enable Create Dedicated View Representation to create a view that displays only the flattened surface.
3. If desired, specify a preset.
4. Faces: In the graphics window, select one or more contiguous faces.

How to create a hole on a curved surface in inventor?

How to create a hole on a curved surface in Inventor. To create a hole on a curved face or surface, two Work Features are needed. A work axis for direction and a work point for the center of the hole. If there is existing geometry that is on the center line and the direction of the hole center that can be used to create a work axis.

How do I select the geometry of an extrusion?

When you create extrusions from a sketch profile, the extruded result that you specify, solid or surface, determines the geometry that you can select. For example, when you specify a surface extrusion, you can select open or closed loops made up of sketch curves or projected face edges.

How does the extrude command work in inventor?

The Extrude command uses a property panel to define the feature. If you are not familiar with Inventor property panels, see About Property Panels to learn about the workflow, behaviors, and advanced options, such as the panel menu and advanced settings.

How do I create work points on a curved surface?

To create the work points select the Work Point command and then select the curved surface then the work axis. There will be a yellow X at the intersection of the curved surface and the work axis. Repeat this for each hole required.