How do you mix Awlgrip paint?
Brush/Roller: Mix by volume two parts Awlgrip Topcoat Base Component with one part Awlcat #3/H3002 Brushing Converter until one smooth, homogenous mixture is obtained. Reduce 10-33% with T0031. Overall mix is 2:1:⅓-1 by volume (8 oz.
How do you mix awlgrip 545?
Spray: Mix by volume one part 545 base with one part D3001 to a smooth homogenous mixture. Reduce up to 25% with T0006. Overall mix is 1:1 1/2 by volume. Example: 8 oz 545 base, 8 oz D3001, 4 oz T0006.
How long does awlgrip take to dry?
12 to 24 hours
Awlgrip urethane coatings go through several cure stages. The first takes 12 to 24 hours at standard conditions (77°F/25°C, 50% R.H.). When this stage is complete the painted surface can be handled; masking tape can be applied for striping; and, the finish appears to be dry. Risk for moisture contamination is now past.
How do you mix awlgrip HDT?
Spray: 1:1:0.25 (Base/Curing Solution/Activator) by volume. Mix by volume one part Awlgrip® HDT Clearcoat Base Component with one part Awlgrip® HDT Curing Solution to a smooth, homogenous mixture. Add 0.25 part of Activator required to enable the cure and achieve full properties. Induction time: 15 minutes.
What is the mixing ratio for Awlgrip paint?
Spray Mix one part Topcoat Base Component with one part Awl Cat #2 G3010 spray converter to a smooth, homogenous mixture. Reduce up to 25% with spray reducers appropriate for conditions. Overall mix is 1:1 1/2 by volume. 25% reduction is a standard mix.
How long does awlgrip 545 take to dry?
12-16 hours
Allow to cure for 12-16 hours. advice if necessary. For wood substrates, first seal the wood with a light coat of 545 Epoxy Primer (spray) reduced 40% with T0006. Allow to cure for 12-16 hours.
Can you buff Awlgrip paint?
Awlgrip has developed Awlcare Protective Polymer Sealer 73240 for those who want to enhance their finish and need the additional cleaning power of a hand applied, dry wash product. Never apply or buff Awlcare with a machine. 2. Do not use abrasives or scratch pads to clean the surface.
How long will Awlgrip last?
Apply a topcoat. Awlgrip – may be brush rolled or sprayed – usually lasts 7-10 years. Awlcraft – must be sprayed only – usually lasts 4-6 years.
What is awlgrip HDT?
Awlgrip HDT (High Definition Technology) is a high performance polyurethane sprayable topcoat that combines hardness and micro-scratch resistance with repairability. Tailored to provide exceptional gloss, unrivalled appearance and superior protection. High gloss & excellent distinction of image (DOI)
How do you mix awlgrip high build primer?
MIX RATIO: Mix 1 part High Build Primer Base D8002 / D9002 (sold separately) : 1 part High Build Primer Converter D3002 and reduce as necessary up to 25% with Reducer T0076 or T0006.
Is awlgrip epoxy paint?
Awlgrip 545 Epoxy Primer BaseColor: White Base – Quart 545 Epoxy Primer is a multi-use epoxy primer used to seal filler primers and fairing work before applying topcoats. For use above and below the waterline.