How do you open a combination locker?

Step 1: Turn the dial 3 times to the right stopping on the 1st number. Step 2: Turn left 1 full turn passing the 1st number and ending at the 2nd number. Step 3: Turn the dial to the right ending on the 3rd number. Step 4: Pull down to open the lock.

How do you break into a locker lock?

Break into a locker by using a pair of bolt cutters to snap off the lock. All you need to do is open the bolt cutters and place them against the piece going through the locker. Close the bolt cutters and the lock will fall right off. It does take some strength though to cut the tool through the thick metal.

How to open a combination lock?

Turn the dial on the lock clockwise three times. Turn the dial to the right. This clears the lock and resets it so that it’s ready to open.[2

Stop turning when the marker points to the first number of the combination. The marker or line should be at the top of the dial, pointing to

Turn the dial back to the left for one full turn. Spin it counterclockwise one full turn, past the first number (36), then stop at the second

Turn the dial to the right. Finally, turn the dial clockwise again and stop at the last number on the sticker—1.[5]X Research source.

How to unlock a Master Lock?

Turn the dial at least three rotations clockwise first, just to make sure it is clear.

Apply pressure on the shackle, which is the curved handle at the top of the padlock.

Find the first sticking point.

Release the shackle tension and turn the dial clockwise slightly past the first sticking point.

What to do with combination lock?

Pick up a combination lock. Turn your combination lock three or more times to the right. Stop on the first number in the combination. It is okay if you slow down. Turn the lock to the left, passing the second number only once. Once you get around to it the second time, stop turning.

How to open a locker?

Spin the dial at least three times to the right (clockwise), all the way around. This “clears” the lock of any previous numbers. If at any point in

Enter your combination. Turn the dial to the right and stop at your first number. Always start with a turn to the right!

Open the lock. Pull the lock open and out of the hole, or pull the latch or handle, if there is one. Otherwise, tug on the knob to open the locker.

Lock your locker after use. Make sure, if you have a locker with an unattached lock, that you lock your locker when you leave. If you don’t, it’s